Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-20-2007, 01:53 PM   #1
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
DT's reason for going to hydraulics over electrics ?

I am trying to gather the reasons why DoubleTree opted for Hydraulic slide actuators & levelers in 2005 to present models.
The original models from 2003 & 2004 were completely electric as far as I can tell.

Looking at the specs for each model / floorplan the weights haven't changed significantly.
Why was the change made. Did everybody with the electric set-ups have warranty issues?
Were the electrics not strong enough to handle the loads?

I'm sure there are many owners here who can shed light on my search for the "real" reason.

Thanks in advance

Rick
__________________

__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 03-20-2007, 02:21 PM   #2
jack_diane_freedom
Senior Member
 
Join Date: Aug 2005
Location: Lindsay Ont, and Gulf Coast Florida
Posts: 138
And once you know these 'real reasons' what will happen? Other than you will maybe sleep better, or not.
__________________

jack_diane_freedom is offline   Reply With Quote
Old 03-20-2007, 02:28 PM   #3
rdunk
Senior Member
 
Join Date: Jun 2005
Location: Texas
Posts: 482
I don't know the "real" reason, but based upon my experiences, I was glad they made the change before I bought. Certainly hydraulics is not a new technology, but, it is often a much better way to quickly move things that are heavy, like slides, and like raising and lowering a fifthwheel.

I never had an RV with electric, but have watched other RV'ers when setting-up, and when taking-down, use the electric functions. It sure seems that things move in and out, and up and down, very slowly. With the hydraulics, those same things move very quickly.

As for the "reason", it will likely fall into either the category of product improvement/customer satisfaction, or improvement to the business model "bottom line". Whichever, IMHO, it was a change for the better, even with some of the hyd. problems some of us experienced, which were covered by factory warranty.
__________________
Robert

Robert and Carlene

2005 RE3, S/N 2107 (sold Jan. 2010)
rdunk is offline   Reply With Quote
Old 03-20-2007, 02:54 PM   #4
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Jack and Diane, yes I will sleep better...
I will also be in a slightly better informed position on deciding to buy a used 04 or 05 model.

A quick check of my sig.shows my present RV choice.
I am trying to settle on a used purchase decision, that's all...
I have electric slides on my Carriage, and the main slides are 13' & 14', they are slow....I guess, but no problems ..ever.

I hope whoever reads this post will understand a little better my motivation for the thread.

Thanks all,

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 03-20-2007, 03:20 PM   #5
RustyJC
Member
 
Join Date: Aug 2006
Location: Cypress, TX
Posts: 94
We've owned 3 5th wheels, all with electromechanical (rack and pinion) slideouts and front jacks. The only problem we've ever had was a broken gear in one slideout gear reduction box of our 2004 MS RE3, and DT replaced the entire gear drive assembly including the electric motor under warranty. That's the only time our 2004 has been back to the shop since we purchased it.

Given the problems I see posted regarding the Lippert hydraulics, I'm glad that we don't have them.

JM2CW....

Rusty
__________________
Rusty & Sandy Creekmore
2 Shelties - Annabelle and Coby
2004 DoubleTree Mobile Suites 36RE3 #1291
2002 Dodge 3500 DRW Cummins HO/6-speed
RustyJC is offline   Reply With Quote
Old 03-21-2007, 07:53 AM   #6
rverdlm
Senior Member
 
Join Date: May 2005
Location: On the road
Posts: 1,063
This is our 3rd full time 5th wheel trailer. When we bought our first one I had the same concern that you seem to have. Some companies said "we will never use hydraulics because they are unreliable". Well, we bought one with hydraulics anyway because we liked the trailer and I thought the issue was a wash. It turned out to be a good trailer, but I did have one problem with the slide. We had an end seal fail on the ram. This caused some oil to leak, but the slide still worked fine. Four years later we were again in the market for a new trailer. Now the company that said never was using hydraulics and the company that made our first trailer had gone to electro-mechanical. We bought the trailer with electro-mecanical. Over the next 4 years we did have problems with this system. Bad motor and later a broken gear box. These failures put you in a bad position because the slides won't move. Both these trailers had mechanical landing gear jacks and stab jacks. While in Newfoundland the landing gear jacks seized and I had to use a bottle jack and blocks to finally get the trailer back on the truck and I was unable to unhook for several days until I was in a place where I could repair it. Dealer support and/or parts were not available in Newfoundland. Now I have full hydraulics from Lippert and I think this is the best system we've had. That does not mean it will never fail, but the effort and time required to set up this trailer is significantly improved. FWIW Teton has gone to Lippert hydraulics and they consider it to be one of their most significant improvements ever. In summary, both systems work, but neither is fool proof and IMHO should not be a deciding factor in a purchase.
__________________
Dave & Barbara
KenWorth T2000
2005 Mobile Suites 38RL3 #2338
MorRyde IS 8K axles, LazyBoy recliners, LCD tv
Full time since '96
rverdlm is offline   Reply With Quote
Old 03-21-2007, 09:29 AM   #7
Burgener_chris
Member
 
Join Date: May 2005
Location: coopersville MI
Posts: 61
The question has a simple answer, weight. These large slide outs are heavy, electric slide-out motors produce, at best, 900# of thrust. In this application the hydraulic system can produce 3000# of thrust. For many years the manufacturers compensated the lack of power by using gearboxes that were very slow. Have you ever had to look at the landing gear to see if it was actually moving when you pushed the button because it was moving so slow?
__________________
Oh how "suite" it is
Burgener_chris is offline   Reply With Quote
Old 03-21-2007, 10:15 AM   #8
Gunship Guy
Senior Member
 
Join Date: Jun 2005
Posts: 238
Quote:
Originally Posted by RustyJC
Given the problems I see posted regarding the Lippert hydraulics, I'm glad that we don't have them.

JM2CW....

Rusty
If you do some research on trailers using gear-driven slides versus hydraulic slides you will see the benefit of using hydraulics.

Given the problems I've seen in various forums regarding gear-driven slides I'm glad I don't have them.

No problems with the Lippert hydraulics on my trailer. Very happy with it.
Gunship Guy is offline   Reply With Quote
Old 03-21-2007, 10:53 AM   #9
RustyJC
Member
 
Join Date: Aug 2006
Location: Cypress, TX
Posts: 94
Quote:
Originally Posted by Gunship Guy
If you do some research on trailers using gear-driven slides versus hydraulic slides you will see the benefit of using hydraulics.

Given the problems I've seen in various forums regarding gear-driven slides I'm glad I don't have them.

No problems with the Lippert hydraulics on my trailer. Very happy with it.
Actually, I'm a moderator on one of the RV forums, primarily in the TT and 5th wheel sections. As such, I have more than a passing familiarity with the technical discussions regarding 5th wheels. I stand by my statement.

Rusty
__________________
Rusty & Sandy Creekmore
2 Shelties - Annabelle and Coby
2004 DoubleTree Mobile Suites 36RE3 #1291
2002 Dodge 3500 DRW Cummins HO/6-speed
RustyJC is offline   Reply With Quote
Old 03-21-2007, 01:52 PM   #10
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
I appreciate the feedback so far...
It has sparked a new question: Do both systems on the MS's have manual over-ride?

I know my Carriage 5th. wheel has easy to access manual over-rides but it will only help if the electric motor has failed, not so much if the reduction gears are done...

If there is a manual system on both types of MS systems how useful are they?
If the hydraulic system is malfunctioning due to a leak, or air, or cylinder failure, how do you ove-ride that?

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 03-21-2007, 02:13 PM   #11
RustyJC
Member
 
Join Date: Aug 2006
Location: Cypress, TX
Posts: 94
The MS electromechanical system is similar to your Carriage. The manual crank only works if the gearing is intact. After our gear failure, I picked up a couple of "come-alongs" to winch the slideout in if we had another failure. As is usually the case, if one has the tools, he never needs them - we haven't had any problems since that single gear failed.

Rusty
__________________
Rusty & Sandy Creekmore
2 Shelties - Annabelle and Coby
2004 DoubleTree Mobile Suites 36RE3 #1291
2002 Dodge 3500 DRW Cummins HO/6-speed
RustyJC is offline   Reply With Quote
Old 03-21-2007, 07:05 PM   #12
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
With the hydraulic system you need a drill motor to drive the pump as a manual over ride. As with the gear box system this also has it faults. If it is a valve failed or the hydraulic pump motor is locked up your up the creek.

My last trailer with hydraulics had a handy hand pump like a hydraulic jack that could bring the slides in with no power and little 3elbow grease.

Rick
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 03-21-2007, 11:21 PM   #13
bstark
Senior Member
 
Join Date: May 2005
Location: Fergus, Ontario, CANADA
Posts: 1,000
Although the "manual over-ride" of this system is only good if the system integrity other than the pump motor is still intact, I don't believe we are "up the creek" necessarily. I would depend on a couple of things like the ratchet strap type of load binders to pull in my slideouts. You could attach a strap at one end of the slideout and if the alignment rack is still intact, the slideout should come in parallel. The bedroom slideout could be brought in the same way by attaching a ratchet strap to framing under the bed once the mattress is lifted and cover boards removed.

I haven't looked closely but perhaps there is an access method to get to the ends of the alignment shaft (the shaft with the gears on it that mesh with the tracks under the slideout supports) and if so perhaps even a rachet handle could be used to turn that shaft and bring slides in or out??

As mentioned by previous poster; this is our second trailer with hydraulic system and have had no problems with either unit.
__________________
Sandra, Bruce
bstark is offline   Reply With Quote
Old 03-22-2007, 10:07 PM   #14
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
problem with bed lift

Since this is about hydraulic slide systems, thought I'd ask about a problem I am having. Just bought a used '05 36TK3 and everything has worked fine for the little amount of time I have had it. However, when trying to raise the bed, it doesn't work, and it appears the bed slide is trying to move--just a slight movement in/out depending on which way the button is pushed on the bed lift.
All the slides work fine, and the problem exists whether the bed is in or out.
It did work fine the first 2-3 times I used it just to see how it works.
From reading earlier posts, I have determined that the valves are all open fully to the stops, and there is plenty of fluid in the resevoir when all slides are in.

Any suggestions?
wingnut60 is offline   Reply With Quote
Old 03-23-2007, 07:49 AM   #15
rverdlm
Senior Member
 
Join Date: May 2005
Location: On the road
Posts: 1,063
Get under your bed and see if everything is still OK. The arms that lift the bed will sometimes bend. Also the hydraulic ram screws will pull out of the floor. I posted on on Yahoo groups how I fixed mine and it's been great since. Here is that post;

We've had problems with our power lift king bed. I have not seen it
discussed so I don't think it's a big issue. However this is what
happened. The hydraulic cylinder pushed and after a few lifts the arms
that lift the bed turned into pretzels. Walnut Ridge said they'd seen
this before and the fix was to strengthen these arms, which they did.
Well that lasted about 2 lifts and the "U" channel that holds the ram
(it's held to the floor with 6 screws) ripped out of the floor. Now
for the good part! Yesterday I took everything apart and drilled more
holes into the "U" channel. It's now held to the floor with 16 bigger
and better screws. It seems to work very well. Only time will tell for
sure. While I had everything apart I removed all the springs and the
fabric that they held. BTW the fabric was tearing the bottom of our
Select Comfort mattress. I replaced the fabric with 2 pieces of luan.
Now the bed covers don't catch on those d__m springs. So far so good.
It seem like a big and easy improvement.

Hope this helps.
__________________
Dave & Barbara
KenWorth T2000
2005 Mobile Suites 38RL3 #2338
MorRyde IS 8K axles, LazyBoy recliners, LCD tv
Full time since '96
rverdlm is offline   Reply With Quote
Old 03-23-2007, 03:59 PM   #16
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
rverdlm--thank you for the response, I will inspect the arms as soon as I get back home.

Joe
wingnut60 is offline   Reply With Quote
Old 03-23-2007, 05:56 PM   #17
Jimfla
Member
 
Join Date: May 2005
Location: Titusville Fl.
Posts: 63
I work on hyd. for a living I woulden't buy a trailer with hyd. slides wait til a hose brakes under bed or in unde belly , the reason they went to hyd is $ hyd. is less than half of th cost of elect. 8 electric motors instead of 1 just my opinion


PS. this came from an engineer at DT who is no longer there JIM
__________________
2011 TK3 5445 mor ryde suspension & pin box fiberglass
2012 3500HD duramax hauler body
Jimfla is offline   Reply With Quote
Old 03-24-2007, 05:04 PM   #18
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Et....VOILA...the real reason.....!
I guess.

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 03-26-2007, 07:59 AM   #19
dave007
Member
 
Join Date: Dec 2005
Location: West Texas
Posts: 39
I have had lots of work experience with hydraulics. The thing that first impressed me about the DT was the hydraulic slides. I think having 6 or 8 electric motors to go bad is more risky than one hydraulic. Just keep the oil level full and the fittings tight and you shouldn't have much trouble. I'm much more comfortable dealing with a little hydraulic fluid than tracking down electrical problems. Just my opinion....Dave
__________________
2007 TK3 Select Suites
2015 GMC 3500 Denali
dave007 is offline   Reply With Quote
Old 03-29-2007, 09:01 AM   #20
WildJohn
Member
 
Join Date: Jun 2005
Posts: 62
I also worked with hydraulics for a long time.. but on my own... and I had to pay the bills... just the hydraulic hose is enough to make multiple motors look pretty attractive... when you think of two hoses for each cylinder and the distance they are away from the pump... quite a bit of money. I doubt if the difference in price is the real reason myself...I personally like the hydraulics. If I were to change, it would to put the BigFoot leveling system on..
__________________

__________________
2005 38RL3
Custom Volvo 610 (the ANGEL)
pressure pro
gearmaster
backup cams
3KW Honda
6V battery bank w/inverters
WildJohn is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 09:14 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×