Check your turning radius to make sure the cable won't be too short and pull out in a tight 90 degree turn like whan you back into a spot. You may also need to do something to keep the cable from rubbing on the tailgate and or bumper to keep from taking paint off of the truck or wearing through the insulation on the cable. If there are no problems like that you're probably going to be fine with it as it is.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|