Red Dale landing gear
Hello to all,,I am in the process of restoring an older Red Dale 5th wheel and need some words of wisdom on the landing gear. The left side jack has stopped moving up or down. After some looking into it, I saw where the roll pin that goes thru the vertical shaft had broken and was not letting the vertical gear rotate.
the jack assembly is a 2" square tubing housing that appears to be held in place with just two 3/8" bolts. I'm thinking I am going to remove both of the jacks completely and do a through disassembly and re-grease of the gears and the verticle threaded rod.
Does anybody know who may carry replacement parts for this type jack? I cannot see any tags or anything on either jack to see what model etc it may be.
Can anybody help?????????THANKS for any help Joe