|
09-29-2019, 08:12 PM
|
#1
|
Junior Member
Join Date: Sep 2019
Posts: 3
|
DRV dryer vent outside cover?
We own a 2017 drv memphis 44 and would like to clean the dryer vent from the outside. Does anyone know how to remove the dryer vent cover on the outside?
__________________
|
|
|
09-29-2019, 08:36 PM
|
#2
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
We have an Elite Suites, full body paint, and that vent doesn’t come off for cleaning. I clipped a small section of screen out so I can reach in with a set of pinchers and clean out any lint.
__________________
|
|
|
09-30-2019, 08:21 AM
|
#3
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
While in Indiana I picked up at Menards a flexible shaft vent brush, made to use with a drill on low speed.
Turn on dryer, run brush from outside, stand to the side
Look similar to this
https://www.amazon.com/Deflecto-Clea.../dp/B00IB4BMDQ
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
|
|
|
09-30-2019, 03:50 PM
|
#4
|
Junior Member
Join Date: Jun 2018
Posts: 14
|
Vent cleaning
Quote:
Originally Posted by porthole
|
Interesting idea but in my experience the run from the dryer to vent is short and straight. The only place I get any buildup is at the vent screen itself.
|
|
|
09-30-2019, 03:59 PM
|
#5
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
Quote:
Originally Posted by RVStrayKatz
Interesting idea but in my experience the run from the dryer to vent is short and straight. The only place I get any buildup is at the vent screen itself.
|
Guess all trailers are different then.
Ours benefited from using that brush.
BYMMV
|
|
|
10-02-2019, 11:56 AM
|
#6
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
My first experience with the Splendide dryers was when I bought a used '15 RSSA. Dryer quit drying soon afterwards. New one worked well, then seemed to be getting worse at drying--decided to clean vent, found the flap locked closed. Apparently, previous owner/dealer never checked it, probably why first dryer went out. Dug out lots of lint, now no problem other than slow times for 110 dryer, and vent is easy to clean after use.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
10-02-2019, 08:35 PM
|
#7
|
Junior Member
Join Date: Sep 2019
Posts: 3
|
I know our flap is working. Do you have a special way of cleaning the vent? We have a vent brush that is attached to an extended handle and I was thinking about wrapping it in something soft, so as not to damage the dryer hose.
|
|
|
10-04-2019, 12:07 AM
|
#8
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Our vent line is only about 6" long, rest is thru the wall. Easy to clean.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
10-04-2019, 08:14 AM
|
#9
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
Quote:
Originally Posted by lucypistole@gmail.com
I know our flap is working. Do you have a special way of cleaning the vent? We have a vent brush that is attached to an extended handle and I was thinking about wrapping it in something soft, so as not to damage the dryer hose.
|
Did you see the brush I linked to above?
The bristles are soft and won’t damage the vent, unless you get rammy with it and push it through the hose.
|
|
|
10-05-2019, 11:33 AM
|
#10
|
Senior Member
Join Date: Sep 2010
Location: Nebraska
Posts: 383
|
They all come off. I know they have used different brands over the years, so yours may be different from mine, but on mine:
1. Take a razor and cut the paint and caulk around the outside edge
2. Tap lightly on the bottom edge, pushing it up slightly.
3. Swing it up like it is hinged at top.
4. Pull outward.
It went on so it has to come off in reverse no matter the brand or type paint. It was actually probably installed after paint and caulked on.
Good luck
Bill
|
|
|
02-22-2024, 04:47 PM
|
#11
|
Senior Member
Join Date: Mar 2018
Location: Georgia
Posts: 158
|
Dryer vent hose detached
I hope y’all see this reply. My dryer vent hose has detached from the dryer. The only way I can think of to fix this is to pull the exterior vent cover off and reach in to reattach it.
How do I get the vent cover off?
Any other suggestions?
I’ve attached photos. One is behind the dryer, inaccessible as far as I can see, one is inside the vent shot from outside and one is the cover.
|
|
|
02-22-2024, 07:54 PM
|
#12
|
Senior Member
Join Date: Sep 2010
Location: Nebraska
Posts: 383
|
Read the answer right above your post
Bill
|
|
|
02-22-2024, 08:51 PM
|
#13
|
Senior Member
Join Date: Jun 2009
Posts: 465
|
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
|
|
|
02-25-2024, 02:37 PM
|
#14
|
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 1,202
|
If you have the Whirlpool Dryer and you remove and clean the lint filter that is NOT all that you should be doing! My dryer was not drying well so I started looking for a replacement and the guy at Lowe's said to look behind the filter there is a wire screen that could be blocked. Sure enough it was basically clogged from 6 years full time use that the small amounts that passed the filter had added up. Still working like new after 8 plus years full time usage.
__________________
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's
2016 MS 39TKSB3 "Highly Elited"
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|