Originally Posted by Firstfiver
I'm sure most 5th wheel owners have wrestled (literally) with putting sheets on the bed. Mine is an older one with a short queen bed nestled between two tall cabinets. Maybe there's 14 inches of space on each side and 12 inches at the foot of the bed. Anybody have a quick and easy way to do this? There must be a YouTube somewhere that demonstrates the "easy" way to do this. (Doesn't help that I'm talker than the ceiling and have to duck the whole time)
They're not cheap but we invested in a set of QuickZip sheets and love, love, love them. These sheets are sized for regular beds and for RV Queen size and RV king size beds.
Briefly the bottom 'fitted' sheet goes on the bed with the 'zipped' sheet. Top sheet is flat. When you're ready to wash the sheets, you simply UNZIP the bottom sheet (now a flat sheet) and you leave the fitted part of the sheet on the bed, never have to remove it. When washed and dried, you simply ZIP on that 'flat' bottom sheet. I LOVE them and no longer have to man-handled the mattress, ever. I'm able to unzip around the top and under the night tables that stick out over the mattress.
We have a 14-inch-thick RV King sized mattress with barely an inch between mattress and night table and NO problems. I literally make our king-size bed in 5 minutes by myself. It was well worth the money! (BTW I cheated when I ordered; only bought the base + zip sheet and I use the top sheet & pillowcases from my original RV king size sheets which never fit as well as this Zip Sheet. The bottom sheet stays nice and snug, doesn't slip & slide or get all wrinkly. You'll love them.