Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-17-2016, 06:58 AM   #1
rperrym
Member
 
Join Date: Jun 2015
Location: Hot Springs, Arkansas
Posts: 55
Manual Operation of Hydraulic Pump

Can anyone tell me what type of bit is used to manually operate the hydraulic pump on a Lippert supplied hydraulic system. I called DRV, but could not get an answer from them. We have an 09 Mobile Suites, but I think the hydraulic system is common to other fifth wheels.

Rick
__________________

__________________
2009 36 TK3
2012 GMC Duramax Denali 3500
rperrym is offline   Reply With Quote
Old 02-17-2016, 07:13 AM   #2
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
I believe it is a common size--somewhere else here or on the SOITC site there is a discussion of the extension tool supplied with some of the newer units. Should be a covering on the pump that is removable--take it off and try some bits to get the size.
If you can't figure it out, I'll be back home Friday and let you know.
If you happen to have the gen prep package, there is a removable panel just opposite the pump end on the gen wall that is used to access the pump.
Joe
__________________

__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 02-17-2016, 07:33 AM   #3
rperrym
Member
 
Join Date: Jun 2015
Location: Hot Springs, Arkansas
Posts: 55
Hydraulic Pump Manual Operation

Thanks for the reply Joe.
I called DRV about the posts that mentioned the tool supplied with newer units, but both parts and tech support did not know what I was talking about and did not know what tool I should use.
That was puzzling.
I did open the small access door and look into the end of the pump, but still could not clearly see what would fit the opening. I did not want to take a chance on stripping out the pump fitting. We are not having problems, but just wanted to have it on hand in case we do.
I would appreciate hearing what you find out on Friday.

Rick
__________________
2009 36 TK3
2012 GMC Duramax Denali 3500
rperrym is offline   Reply With Quote
Old 02-19-2016, 03:52 PM   #4
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
The nut on the end of the pump is a 1/4" hex nut. There is a seal over the nut that has to come off to access it.
I do not know enough about the pump to say whether the rotation direction of the pump dictates in/out on slides, or if that is controlled by the valving with the motor direction always the same, but there are arrows on the seal indicating C/W-CCW direction.
Hope this helps a little.
Not puzzling about lack of info over the phone--seems you either get a good one or a non-caring one when calling.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 02-19-2016, 04:00 PM   #5
rperrym
Member
 
Join Date: Jun 2015
Location: Hot Springs, Arkansas
Posts: 55
Manual Operation, Hydraulic pump

Well, I got a call back from another Tech Support guy at DRV, and he said it would take a 1/4 " square socket???
I have the Generator prep, and mine is turned sideways towards the wall of the steel storage area. I opened the access port, and peeled off a label, or seal, and it fell down between the walls. It is hard to see inside to get a good look at the fitting.
If mine is also a hex fitting, what would I use to operate it? I don't remember seeing a hex socket.
Thanks for the reply.
Rick
__________________
2009 36 TK3
2012 GMC Duramax Denali 3500
rperrym is offline   Reply With Quote
Old 02-19-2016, 07:22 PM   #6
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Right. It's a 1/4" square head. Not hex head. Not a nut. Available at any auto parts or Harbor Freight or big box lumber store. Get a flash light while you're there. You will be able to see better. The paper is just informational. Serves no real purpose. An electric or cordless drill will work good. You could not ratchet fast enough to build pressure.

Bill
porkchop is offline   Reply With Quote
Old 02-19-2016, 07:57 PM   #7
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
I have a spare pump I just purchased from a forum member--it has a HEX DRIVE head bolt. That is, a 1/4" allen wrench (just to describe shape with no confusion) would fit the hex head, but you would need a long enough straight piece that would reach from the drill to the pump head. The paper cover itself says 1/4" hex.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 02-20-2016, 09:10 AM   #8
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Yours is different than mine then. I just went out and checked and it's a 1/4" square. I took a 1/4" drive socket 12" extension and it fit right in tightly and turned correctly.

Bill
porkchop is offline   Reply With Quote
Old 02-20-2016, 09:22 AM   #9
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
Good mention Bill--my unit is an '05 and the pump is out of an '09, so don't know when they may be putting in different pumps.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 02-22-2016, 12:38 PM   #10
rperrym
Member
 
Join Date: Jun 2015
Location: Hot Springs, Arkansas
Posts: 55
Thanks Bill and Joe. I checked mine today, and a 1/4" allen wrench fits it perfectly. Now to find something that works in my drill.

Rick
__________________

__________________
2009 36 TK3
2012 GMC Duramax Denali 3500
rperrym is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 04:33 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×