|
04-27-2011, 02:05 PM
|
#1
|
Senior Member
Join Date: Jan 2006
Location: Currently: working on the road
Posts: 770
|
Quadra Steps
FYI: watch out if you pay extra for the upgrade of 4-steps. Elkhart Tool & Die only gives a 1yr warranty. Never had a problem with our 3-step version on our Elite in nearly 3 years. These steps are just over 2 yrs.
Ours had started to drop and I thought it was because we weren't on a concrete slab and the coach was dropping. Turns out the top that holds the stationary bar split on both sides.
Contacted DRV and then Elkhart once we found out who actually made them. DRV offered to give it to us at reduced cost, but Elkhart sent us to the highest price retailer on the Internet.
David blocked them up temporarily, so I don't fall everytime I walk outside. We're now debating welding or going with an alternative.
__________________
__________________
2014 Mobile Suite Estates 38RSB - custom home
2014 F450 KR CC 4x4 ...... his office
2015 Lance 1172 - traveling Motel (solar and generator)
Working Fulltimers since 3/2005
|
|
|
04-27-2011, 03:18 PM
|
#2
|
Senior Member
Join Date: Oct 2005
Location: Fort Worth,TX
Posts: 162
|
4 step
We ordered out 4 step when we purchased our 06. So far no problems....
__________________
__________________
Wilma & John
2006 Mobile Suite 36TK3
|
|
|
04-27-2011, 07:42 PM
|
#3
|
Senior Member
Join Date: Nov 2005
Location: Illinois-summer,winter-some where else
Posts: 336
|
steps
I am thinking on getting the 4 step with this next one I am going to order this summer. Would be very interested in any more pro's and con's
__________________
12 Blue Elite #6296 38RS3
08 chevy C3500
09 yel spyder toad
|
|
|
04-27-2011, 09:10 PM
|
#4
|
Senior Member
Join Date: Feb 2009
Location: Retired Okie now in Colorado
Posts: 531
|
We have the four-step RV steps as well. I plan on buying two different sizes of RV step stabilizer jacks to put under the bottom two steps. I figure that will help stop the flexing that is done when my 220 pounds hits each step and lessen the strain on the rest.
I just haven't decided whether to put one stabilizer jack for each step or two jacks. I may start with one each in the centers and if that doesn't suit me, I'll buy another set and place one on each side of each ot the bottom two steps.
Here is a link to some at Camping World, although I think I've seen similar ones cheaper on Amazon.
http://www.campingworld.com/shopping...tep-jacks/5416
__________________
Terry and Jo
2010 Mobile Suites 38TKSB3 #5332 - 2008 Ford F450
Terry's Smugmug Site
|
|
|
04-28-2011, 09:36 AM
|
#5
|
Senior Member
Join Date: Jan 2006
Location: Currently: working on the road
Posts: 770
|
I looked all over the Internet to see if there were any complaints about the Q-Steps. But could only find recommendations.
Elkhart T&D also sells jacks. But ironically, they say they are not needed with their Quadra steps.
I really wish we had ordered ours with the standard 3 steps and saved our money. Then continued to build a platform with block. But you just never know....
|
|
|
04-28-2011, 10:10 AM
|
#6
|
Senior Member
Join Date: May 2005
Posts: 2,130
|
We have the 3 step and use a step stool when needed.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|
|
|
04-28-2011, 10:30 AM
|
#7
|
Senior Member
Join Date: Nov 2005
Location: Springfield, Il.
Posts: 655
|
What I have noticed on our three step is that we step up on the left side in order to open or unlock the door. This is putting pressure on that left side and after a period of time it starts to sag.
Maybe there needs to be a support on that left side to correct that.
I'm sure that if we are stepping up on that left side most everyone else is also and probably not even realizing it. jmho
__________________
Ponch
S.O.I.T.C. Central Division
2007.5 3500 HD GMC dually
Mobile Suites 2005 36CK3 #2307 w/ auto levelers/ phase 2
Air Safe Hitch
HD TV in the basement and living room and bedroom
HD MOTO SAT Auto Ant on roof
pressure pro
|
|
|
04-28-2011, 06:39 PM
|
#8
|
Senior Member
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
|
We have the 3 step. Sometimes have to use a portable step from CW and it is fine. But only need it about 10% of the time. There are also times when the 3 step is very close to ground, and I wonder about what you would do with the 4 step then?
Also had a bolt break on the RH side of the step. No sag on LH side yet.
Bill
|
|
|
04-28-2011, 10:11 PM
|
#9
|
Senior Member
Join Date: Aug 2006
Location: Tuttle Oklahoma
Posts: 194
|
I had a bolt break at the top step on the right side also. It was a rivet type bolt tapered on the end that flared. I drilled out the small end with a 3/8" drill and replaced with a 3/8" bolt with washers and a lock nut. Works fine and was easy to do. Need easy.
Okie
__________________
Okies on the road
15 Columbus 381FL
08 F450
|
|
|
05-02-2011, 04:33 PM
|
#10
|
Member
Join Date: Jul 2009
Posts: 39
|
I replaced my 3-step with a 4-step several years ago, and have had no problems with it.
We really enjoy the 4-step and would NEVER go back to a 3 step. I test it every day with my 250 lbs and it's lasted with us full timing. It does have a little give in it when I hit the bottom step, but it's not an issue.
__________________
1999 International 4700LP With Stalick conversion
2005 Mobil Suite 33RS3,
Yamaha 500 Kodiak & 500 Wolverine
And our mini Greyhound, Shalamar
|
|
|
05-03-2011, 09:21 AM
|
#11
|
Senior Member
Join Date: Jan 2006
Location: Currently: working on the road
Posts: 770
|
We opted to have the breaks welded. The welder did it all the way around the rod, instead of just one small section the mfger did. Total cost: $40, 10-15 mins and they came to us.
So will repaint the steps and see how it holds up for the next couple of years.
__________________
2014 Mobile Suite Estates 38RSB - custom home
2014 F450 KR CC 4x4 ...... his office
2015 Lance 1172 - traveling Motel (solar and generator)
Working Fulltimers since 3/2005
|
|
|
05-03-2011, 12:02 PM
|
#12
|
Member
Join Date: Feb 2011
Location: Port Charlotte, Fl.
Posts: 59
|
My problem with the 4 step is using step covers. With the springs holding the covers on (the last step) I can not close the steps. I thing I will have to secure the cover with Velcro or ???.
__________________
Pat & Sandy L.
36 TKSB4
2005 F350 CC 4x4
|
|
|
05-03-2011, 12:45 PM
|
#13
|
Member
Join Date: Mar 2007
Location: USA
Posts: 61
|
We have the 4 step also, and had the top corners welded and 2nd step reinforced by welding. Repainted them in January and they still look good.
As for a mat covering the steps. DH took an outdoor rug (cheap black one from Wally $9.00 for all 4 steps) and cut to cover tops of step. Flat top bolts to make sure it stays down in this TX wind. Made sure when folding them up for storage down the road that it would do so with ease. Really happy with 4 versus 3, mainly because of old dogs.
A suggestion for those that stay for more than a week in a place. We went behind a grocery/mini-mart and found that pepsi/coke leave their pallets. After asking if the store was responsible or what their known policy was on these crates. Was able to take just one and cut it in 1/2 and it is perfect for support of the last step and makes it a lot easier to get in and out. I feel that when you have to open your door off the steps in order to get in that the crate gives that little height I need. Not 6'4" like DH!!
Just a suggestion.
__________________
Gary and Sheryl
3 Cairns + cat
08' F450 Lariat Duel Axle 4X4
MS 36SB3 2007 #3565
|
|
|
05-03-2011, 06:17 PM
|
#14
|
Senior Member
Join Date: Oct 2005
Location: Fort Worth,TX
Posts: 162
|
4 step
Pat,
I just remove the cover on the last step when I am ready to travel....only takes a couple of seconds...
__________________
Wilma & John
2006 Mobile Suite 36TK3
|
|
|
04-16-2016, 07:07 AM
|
#15
|
Junior Member
Join Date: Nov 2011
Location: U.S.A.
Posts: 23
|
What brand Step Covers work on the "4-Step" entrance.
|
|
|
04-16-2016, 01:06 PM
|
#16
|
Senior Member
Join Date: Oct 2005
Posts: 163
|
Quote:
Originally Posted by Maverick
What brand Step Covers work on the "4-Step" entrance.
|
We use the ones available from the camping section at Walmart. The only thing we had to do different is that the lowest step's springs that hold on the carpet get smashed and tend to fall off. We went with zip ties for that bottom step, problem solved.
Joe
|
|
|
04-16-2016, 06:44 PM
|
#17
|
Senior Member
Join Date: May 2005
Location: Home Prescott, Az
Posts: 1,019
|
I used to buy a good carpet sample, cut it to fit the step size exactly. Then got some velcro strips and cut to fit the sides of the carpet and glued with Gorilla glue to the carpet and the other piece of the velcro to the top of the step. So when we parked i put the 4 step pads on the steps. When we were about to pullout, peeled the carpet pieces off and put them into a plastic bag for travel. The carpet caught the dirt on the bottom of your feet and were not slippery when wet like some of the plastic material type of step pads we used in the past. If they got dirty, just peel them off and hose them down, hang up and let dry. If it was raining no problem as they dried fast. That is how I did it. Also made folding up the steps easy when the pads were removed and stored.
__________________
__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|