Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-14-2019, 03:16 PM   #1
4happyfeet
Member
 
4happyfeet's Avatar
 
Join Date: Jul 2018
Location: Anna, TX
Posts: 65
Break failure

When it rains...Put the rig away, next time out, no brakes! Truck says it’s putting out 6.5 gain. Any suggestions on how I can start to track the trouble down? Speak slowly, please, I’m not very mechanically oriented. Thanks!
__________________

__________________
Kent & Mindy
2019 MS 41 RKSB4-Home
2022 Rockwood 2893-Play
2021 Ram 3500 HO DRW
4happyfeet is offline   Reply With Quote
Old 12-14-2019, 03:31 PM   #2
anijet
Senior Member
 
Join Date: Dec 2006
Location: Central California
Posts: 288
When you apply the trailer brakes manually with the ITBC lever do you hear the trailer actuator running? Assuming you have disc brakes.


If you do, check the brake actuator fluid level.


If not, you'll need to troubleshoot from the ITBC to the actuator circuit and go from there.
__________________

__________________
Leo and Janice
2007 MS 36 TK3 Glide Ride pin box
2012 GMC 3500HD D/A CC 4X4 DRW AirSafe Hitch
anijet is offline   Reply With Quote
Old 12-14-2019, 04:38 PM   #3
4happyfeet
Member
 
4happyfeet's Avatar
 
Join Date: Jul 2018
Location: Anna, TX
Posts: 65
Thanks, anti jet. What I heard was “put part A into part b and if that doesn’t go, then try part C”. Sounds like a dealer visit. I looked inside the cabinet where the batteries are, but I think I was looking at the slide hydrolics. Yes, they are disc brakes. Where is the brake actuator located? Same compartment?
__________________
Kent & Mindy
2019 MS 41 RKSB4-Home
2022 Rockwood 2893-Play
2021 Ram 3500 HO DRW
4happyfeet is offline   Reply With Quote
Old 12-14-2019, 11:37 PM   #4
anijet
Senior Member
 
Join Date: Dec 2006
Location: Central California
Posts: 288
My unit is older so may not be the same but it is a Carlisle and is behind the sliding doors in the basement.



Looks like: https://www.etrailer.com/Brake-Actua...ar/HBA-12.html
__________________
Leo and Janice
2007 MS 36 TK3 Glide Ride pin box
2012 GMC 3500HD D/A CC 4X4 DRW AirSafe Hitch
anijet is offline   Reply With Quote
Old 12-15-2019, 07:55 AM   #5
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 1,188
First thing is your actuator making noise when applying the brakes? If it is do the following.

Looking at the water manifold now look to the left. It's a silver aluminum box about 3" wide and 8" tall with a black cap on the top. Remove cap look inside is there any brake fluid visible? Stick your finger down into the hole is there any on your finger?

If you can't feel the fluid and actuator has no fluid you have a huge air gap and the brakes will not work or very poorly. Cure is to bleed the brake lines. I "HIGHLY" advise doing the job right where you are! do not take your RV onto the road with NO brakes!!!
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Old 12-16-2019, 08:25 PM   #6
stanleyz
Senior Member
 
stanleyz's Avatar
 
Join Date: Sep 2011
Location: Sharpsburg (ATL) GA
Posts: 196
How did you determine you have no brakes. I ask because if you are checking for brakes under about 12 MPH there will be no out put, Secondly these trucks are prety smart and they will tell you is the trailer has a wire fault. I don;t think 6,5 will do much stopping on a trailer that big. If you have disc brakes that may not be true. Hope this is helpful
__________________
JUST ANOTHER DEPLORABLE
stanleyz is offline   Reply With Quote
Old 12-17-2019, 09:11 AM   #7
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Don't understand "under about 12 MPH there will be no out put" My brakes work as well at 5 mph as they do at 65mph. Explain please.

Bill
porkchop is offline   Reply With Quote
Old 12-17-2019, 10:04 AM   #8
stanleyz
Senior Member
 
stanleyz's Avatar
 
Join Date: Sep 2011
Location: Sharpsburg (ATL) GA
Posts: 196
Quote:
Originally Posted by porkchop View Post
Don't understand "under about 12 MPH there will be no out put" My brakes work as well at 5 mph as they do at 65mph. Explain please.

Bill
The OP has a ford truck, ford trucks do not output through the cord below 12 or 13 MPH. You may have a different truck or prehaps ford changed that lately but 2014 and up to 2016 applies. Often people will put a voltage meter on the two brake pins and have someone push the brake pedal. Thjey will get no voltage and assume a problem when none exsist. It will supply voltage if you squeeze the two little handles on the controller.
__________________
JUST ANOTHER DEPLORABLE
stanleyz is offline   Reply With Quote
Old 12-17-2019, 10:31 AM   #9
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Well, I have a 2008 Ford F350 & a 2017 Ford F350. The brakes on either, when hooked to my DRV do work at 5 Mph as I stated above. Hard and rock solid. That is using the foot pedal or the hand brake. I just came back inside from verifying that with the 2017.

Bill
porkchop is offline   Reply With Quote
Old 12-17-2019, 01:50 PM   #10
Srosa
Junior Member
 
Join Date: Feb 2019
Posts: 22
I have a 2017 F450 and at very low speeds, the controller significantly reduces trailer braking force. The hand switch on the controller can be used to apply more trailer braking if needed. This braking ‘characteristic’ has been discussed at length on the Ford forums.
__________________
2018 DRV 38RSSA, 2017 Ford F450 LWB 4X4
Srosa is offline   Reply With Quote
Old 12-17-2019, 06:19 PM   #11
Notanlines
Senior Member
 
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
What Srosa said. Our 2019 is the same.
Notanlines is offline   Reply With Quote
Old 12-17-2019, 07:40 PM   #12
stanleyz
Senior Member
 
stanleyz's Avatar
 
Join Date: Sep 2011
Location: Sharpsburg (ATL) GA
Posts: 196
Quote:
Originally Posted by porkchop View Post
Well, I have a 2008 Ford F350 & a 2017 Ford F350. The brakes on either, when hooked to my DRV do work at 5 Mph as I stated above. Hard and rock solid. That is using the foot pedal or the hand brake. I just came back inside from verifying that with the 2017.

Bill
Interesting, mine on a 2014 do not. I had an 08 also but I don't remember if they did or not on that truck. Below 12 MPH I don't think I could tell if the trailer brakes did anything or not when the pedal is applied. Of course they bite with the squeezer, and that's how I check them when getting underway. As someone below said this has been discussed on FTE. I had a problem with mine and when trouble shooting that learned the hard way that there is no output from the brake pedal stopped. I learned from somewhere that they did not output below 12 MPH. But if you are sure your controller is stopping the trailer and not the truck brakes I guess Ford may have changed it on the 17 and up.

On Edit. OK I almost had it right. 2014 owners manual page 192. The TBC outputs very low signal at speeds under 11 MPH. What I told the OP waas correct. You cannot trouble shoot the trailer brakes when stopped by having someone push the brake pedal while you check for power at the wheels. You can however check them by squeezing the hand control. You can also check the trailer by pulling the break away, trailer should lock up.
__________________
JUST ANOTHER DEPLORABLE
stanleyz is offline   Reply With Quote
Old 12-17-2019, 08:57 PM   #13
stanleyz
Senior Member
 
stanleyz's Avatar
 
Join Date: Sep 2011
Location: Sharpsburg (ATL) GA
Posts: 196
All right I think I got it right now, see my entry above. Also I would add that if you are alone you can take a pair of vice grip pliers and loch the squezzers and that should activate the trailer brakes. They can be checked with a compass or you should be able to hear a hummmmmm at each wheel. Best check of colurse is get the wheel up and spin it then squeeze or use the vice grips and see if the wheel is locked. Release vice grips while jacking for the next wheel. Hope this helps someone.
__________________
JUST ANOTHER DEPLORABLE
stanleyz is offline   Reply With Quote
Old 12-17-2019, 10:33 PM   #14
anijet
Senior Member
 
Join Date: Dec 2006
Location: Central California
Posts: 288
Quote:
Originally Posted by stanleyz View Post
All right I think I got it right now, see my entry above. Also I would add that if you are alone you can take a pair of vice grip pliers and loch the squezzers and that should activate the trailer brakes. They can be checked with a compass or you should be able to hear a hummmmmm at each wheel. Best check of colurse is get the wheel up and spin it then squeeze or use the vice grips and see if the wheel is locked. Release vice grips while jacking for the next wheel. Hope this helps someone.

OP has electric over hydraulic disc brakes not electric drum brakes.
__________________
Leo and Janice
2007 MS 36 TK3 Glide Ride pin box
2012 GMC 3500HD D/A CC 4X4 DRW AirSafe Hitch
anijet is offline   Reply With Quote
Old 12-18-2019, 08:35 AM   #15
stanleyz
Senior Member
 
stanleyz's Avatar
 
Join Date: Sep 2011
Location: Sharpsburg (ATL) GA
Posts: 196
Quote:
Originally Posted by anijet View Post
OP has electric over hydraulic disc brakes not electric drum brakes.
I didn’t see that. Sorry. But still this may help someone with an old junky trailer like mine.
stanleyz is offline   Reply With Quote
Old 12-18-2019, 11:51 AM   #16
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 1,188
Hold the OH SH!T bar or place foot on brake pedal you should hear the actuator making noise in the basement.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Old 12-19-2019, 08:42 AM   #17
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
I really don't care what happens in any vehicle discussed somewhere else. Or what happens in your truck. I stated what happens in mine. And my trailer brakes work with the foot pedal or the squeeze bar at below 12 mph. Rock solid.
At an absolutely dead stop you can hear the actuator powered up and working.
Sorry about yours.

And both of my vehicles are older than 2017.

"the controller significantly reduces trailer braking force. The hand switch on the controller can be used to apply more trailer braking"

Don't really understand this statement. The 'controller reduces braking' or 'the 'controller can be used to apply more braking' ??

Bill
porkchop is offline   Reply With Quote
Old 12-19-2019, 03:14 PM   #18
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
"Well, I have a 2008 Ford F350 & a 2017 Ford F350."

"And both of my vehicles are older than 2017."

Some more hard to understand statements....
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 12-19-2019, 03:25 PM   #19
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
The point was=He said he thought ford changed in 2017. I said I have a 08 & a 17=They both brake exactly the same. There==that seems easy to understand.

Bill
porkchop is offline   Reply With Quote
Old 12-19-2019, 05:17 PM   #20
Srosa
Junior Member
 
Join Date: Feb 2019
Posts: 22
Quote:
Originally Posted by porkchop View Post
The point was=He said he thought ford changed in 2017. I said I have a 08 & a 17=They both brake exactly the same. There==that seems easy to understand.

Bill
This is from my 2017 Ford F450 owner’s manual in the towing section:

“The trailer brake controller is equipped with a feature that reduces output at vehicle speeds below 11 mph (18 km/h) so trailer and vehicle braking is not jerky or harsh. This feature is only active when applying the brakes using your vehicle's brake pedal, not the controller.”

Steve
__________________

__________________
2018 DRV 38RSSA, 2017 Ford F450 LWB 4X4
Srosa is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×