Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-19-2010, 05:03 PM   #1
sylvain&lynn
Junior Member
 
Join Date: Nov 2008
Location: val des monts quebec
Posts: 28
wheel tork

it is now time for us canadian to get ready for the camping season i am taking the wheel off the elite suite to check brakes and grease the suspension it will be a good time also to polish the aluminum wheel does anybody kmow at what these wheels have to be tork at

thank you

sylvain&lynn
__________________

sylvain&lynn is offline   Reply With Quote
Old 03-19-2010, 07:06 PM   #2
golf_bears
Senior Member
 
Join Date: May 2007
Location: West Bend, Wisconsin
Posts: 397
I think you have the 17-1/2" tires and if so, they should be torqued to 145 ft lbs.
__________________

golf_bears is offline   Reply With Quote
Old 03-20-2010, 11:00 AM   #3
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
Aluminum wheel torque for the 17.5" wheels and Dexter 8,000 lb axles is 150 ft lbs. Set the torque, drive about 50 miles, re torque then again at about 100 to 150 miles. Leave the tin lug nut caps off until you have done the last torque to save some time and to keep from losing the little suckers.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 03-21-2010, 08:01 AM   #4
BillA
Member
 
Join Date: Aug 2009
Location: Houston, Tx
Posts: 47
Are you sure you can polish the aluminum wheels? I think they have some sort of plastic coating on them to keep them from oxidizing and if you attempt to polish them you will scratch or destroy the plastic surface.
Not sure about this but before you polish I would check. Maybe someone on the forum knows the answer?
__________________
Bill & Ann Anderson
2010 Elite 38RS4 (On order)
2007 Freightliner M2-106 Chariot Conversion
BillA is offline   Reply With Quote
Old 03-21-2010, 02:26 PM   #5
sylvain&lynn
Junior Member
 
Join Date: Nov 2008
Location: val des monts quebec
Posts: 28
thanks guy,s for your help for polishing aluminum wheels you may be right i will clean them up and i will check to see if their is a plastic on them



sylvain&lynn
sylvain&lynn is offline   Reply With Quote
Old 03-22-2010, 09:50 AM   #6
Huck
Senior Member
 
Join Date: May 2007
Location: Bouse, Az./Franklin,Pa.
Posts: 252
Send a message via ICQ to Huck
The wheels have a clear coat paint on them like a Ford.
__________________
Huck & Dodie
2005 RE3 MS #2163
2006 F-350 CC 4X4
Huck is offline   Reply With Quote
Old 03-22-2010, 05:59 PM   #7
jimlok
Junior Member
 
Join Date: Nov 2009
Location: Missouri
Posts: 1
The information that I found called for 217 ft lbs on the 17 1/2" wheels.
150 ft lbs was not enough on 5/8" bolts.
__________________
Jim and Marsha
2007 GMC Duromax
2008 Mobile Suite 38RLSB3
jimlok is offline   Reply With Quote
Old 03-22-2010, 06:08 PM   #8
sylvain&lynn
Junior Member
 
Join Date: Nov 2008
Location: val des monts quebec
Posts: 28
now i am really confuse 145 150 215 :( :( :roll:


sylvain&lynn
sylvain&lynn is offline   Reply With Quote
Old 03-22-2010, 09:07 PM   #9
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
Torque on mine is stamped right on the nuts.

Bill
__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote
Old 03-23-2010, 10:53 AM   #10
Huck
Senior Member
 
Join Date: May 2007
Location: Bouse, Az./Franklin,Pa.
Posts: 252
Send a message via ICQ to Huck
Dexter says to check with the wheel manufacturer.

But they also say to torque "hub pilot clamp ring and cone nuts"(tapered) on 17.5" wheels to 190-210 foot lbs.
And "Hub pilot 5/8" flange nuts"(flat face) 275-325 foot lbs. on 17.5" wheels.
__________________
Huck & Dodie
2005 RE3 MS #2163
2006 F-350 CC 4X4
Huck is offline   Reply With Quote
Old 03-24-2010, 06:20 PM   #11
westx
Member
 
Join Date: Jun 2005
Location: Fulltiming
Posts: 76
wheel tork

Tag on hitch of our 2009 MS shows 17.5 tork 125-150 ft lb
__________________
Don & Wanda
2009 40DB3 w/office # 4941 level-up first one button system
Retired
Fulltimers since Sept. 06
westx is offline   Reply With Quote
Old 03-25-2010, 08:49 AM   #12
golf_bears
Senior Member
 
Join Date: May 2007
Location: West Bend, Wisconsin
Posts: 397
Was very surprised to see how much variation in responses you received in this thread. I called both DRV (two sources there) and Lippert.

If you have the Lippert axles, 17-1/2 tires with the 5/8" studs and aluminum wheels the torque requirement is 125 - 150 ft lbs.
golf_bears is offline   Reply With Quote
Old 03-25-2010, 03:15 PM   #13
sylvain&lynn
Junior Member
 
Join Date: Nov 2008
Location: val des monts quebec
Posts: 28
i do have 17.5 aluminum wheels so 150 sound right thanks everybody for your help

sylvain&lynn
sylvain&lynn is offline   Reply With Quote
Old 04-09-2010, 11:11 PM   #14
rverdlm
Senior Member
 
Join Date: May 2005
Location: On the road
Posts: 1,063
If you have flange nuts the correct torque is 150 lb/ft. It's stamped right on the nut flange! Cone nuts are different and the main thing with them is to retorque after 50 miles and then again after 300 miles. My thought would be to go with 150 lb/ft as that will be more than enough if you stay on top of them. More, up to 200, won't hurt anything IMHO!
__________________

__________________
Dave & Barbara
KenWorth T2000
2005 Mobile Suites 38RL3 #2338
MorRyde IS 8K axles, LazyBoy recliners, LCD tv
Full time since '96
rverdlm is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 12:44 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×