Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-22-2007, 10:51 AM   #1
JudyGail
Senior Member
 
Join Date: Jun 2006
Location: Salt Lake City, Utah
Posts: 148
Send a message via ICQ to JudyGail
Slide Topper Issues

On another thread Rotaxman said:

"These worthless A&E's bang and whip in wind and hold water dealer said I could not wrap them any tighter because they would pull the rail off of the trailer. I'm not sure I believe that but it could be possible given DT's poor engineering and the assembly lines lack of any pride in their work. "

I assume you're talking about ALL RV manufacturers because nearly all slide toppers have these same issues no matter what RV they are on.

I've heard a beach ball will help keep the flapping down to a low roar and let the water run off the topper. Just inflate the ball so it fits snuggly between the slide and the topper to tighten the topper. It probably won't look real pretty, but it works.... and it's cheap.
__________________

__________________
Judy Gail
MobileSuites '06 36TK3 #3151
Fulltimer Aug. '06, Hit the Road Sept. '07
JudyGail is offline   Reply With Quote
Old 08-22-2007, 01:35 PM   #2
Carny Bill
Senior Member
 
Join Date: Nov 2005
Location: Illinois-summer,winter-some where else
Posts: 336
topper awning

One word of caution, and speaking from experience. When u go to remove the beach ball, u will be on a ladder. Do Not face the ball and pull it out. I got the shower of a lifetime doing that in the winter when the ice and melted snow was on it.

Bill
__________________

__________________
12 Blue Elite #6296 38RS3
08 chevy C3500
09 yel spyder toad
Carny Bill is offline   Reply With Quote
Old 08-22-2007, 03:46 PM   #3
JudyGail
Senior Member
 
Join Date: Jun 2006
Location: Salt Lake City, Utah
Posts: 148
Send a message via ICQ to JudyGail
Forgive me, but ................. I bet that was a real shocker!
__________________
Judy Gail
MobileSuites '06 36TK3 #3151
Fulltimer Aug. '06, Hit the Road Sept. '07
JudyGail is offline   Reply With Quote
Old 08-22-2007, 07:01 PM   #4
Carny Bill
Senior Member
 
Join Date: Nov 2005
Location: Illinois-summer,winter-some where else
Posts: 336
awning

Boy O Boy was it. It was a hugh waterfall. I could not believe my stupidity.
__________________
12 Blue Elite #6296 38RS3
08 chevy C3500
09 yel spyder toad
Carny Bill is offline   Reply With Quote
Old 08-23-2007, 04:04 PM   #5
BobW
Senior Member
 
Join Date: May 2006
Location: Welches Oregon
Posts: 523
One time I thought about slipping a kids air mattress under the topper. That would keep the wind from flipping it and elevate it enough to keep out the rain. The long ones may need two. Blow them up and slip them in place.
__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.
BobW is offline   Reply With Quote
Old 08-24-2007, 09:55 AM   #6
2 DA WDS
Senior Member
 
Join Date: Jun 2005
Location: Illinois
Posts: 527
Heres a light bulb that just went on.
What about tying them down? Throw a rope, strap whatever over it length ways and attach the strap to the bottom of the slide?
__________________
Happy Trails To You
Tom & Cheryl Brockman S.O.I.T.C. Charter Member
2015 39DBRS3, Truma water heater, 2inch lift, custom paint
2011 RAM Cummins 3500 Dually
2 DA WDS is offline   Reply With Quote
Old 08-24-2007, 11:19 AM   #7
jdwilson3
Senior Member
 
Join Date: Mar 2006
Location: Austin Arkansas
Posts: 399
toppers

I tried tying them down on my Avion, thought it looked like XXXX!

I then made PVC ridge pole in 3 foot lengths. Each length was tied by a PVC "T". A 8 inch "leg" into the bottom of the "T". A second "T" was used as a "Foot" for the "leg". Only used when we were going to be somewhere for a longer stay.

Yes, you have to use a ladder to put under the topper. Worked very well and kept the topper from flapping in the wind, as well as kept water off the topper.

Beach balls can blow out in strong winds.
__________________
John & Peggy
1SG US Army Retired
jdwilson3 is offline   Reply With Quote
Old 08-24-2007, 01:39 PM   #8
BobW
Senior Member
 
Join Date: May 2006
Location: Welches Oregon
Posts: 523
Just remember, anything you put under the topper can migrate to the center and be a bitch to get out. I remember once we were camping in Virginia City, just out from Reno. The wind always blows there very hard, every night. It blew so hard one night we had to close all the slideouts. Made it hard to remember where the bathroom was that night.
__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.
BobW is offline   Reply With Quote
Old 08-24-2007, 04:31 PM   #9
jdwilson3
Senior Member
 
Join Date: Mar 2006
Location: Austin Arkansas
Posts: 399
center support

Bob, the "ridge pole" is as long as the slide, each section about 3 feet long, add a T, another pole, another T, etc. A pole section can be cut to a different length to equal the length of the slide. Shoving the pole into the T tightly, the whole assembly can be removed from one end! No need to cement the assembly, then you can disassemble and take along.

I made two sets for my Avion, and they worked great, but I pitched 'em when I traded the Avion, and should have kept 'em.
__________________
John & Peggy
1SG US Army Retired
jdwilson3 is offline   Reply With Quote
Old 08-24-2007, 08:00 PM   #10
bstark
Senior Member
 
Join Date: May 2005
Location: Fergus, Ontario, CANADA
Posts: 1,000
JD: I like that idea as I made some for a previous trailer out of that "imitation" wood they use for fencing but the damn things were a pain to pack so when we bought this trailer we opted to not have the slideout awnings and to date have not regretted our decision. Our SOB trailer was only three years old and the edges of the AE vinyl awnings were already fraying & starting to look ugly.

Your idea of the PVC is great for it's adjustability and lightness as well as the take-apart-to-pack convenience. Great idea!
__________________
Sandra, Bruce
bstark is offline   Reply With Quote
Old 08-24-2007, 10:09 PM   #11
rverdlm
Senior Member
 
Join Date: May 2005
Location: On the road
Posts: 1,063
Why have slide toppers when they are such a problem? I've been full time for over 11 years. All trailers have had slides. Never wished I had toppers. What good do they do? Everyone I've met over those years that had them had problems! When I was a mechanic on caravans 90% of the problems were with slide toppers. I would never have them. Cut them off and get on with life!
__________________
Dave & Barbara
KenWorth T2000
2005 Mobile Suites 38RL3 #2338
MorRyde IS 8K axles, LazyBoy recliners, LCD tv
Full time since '96
rverdlm is offline   Reply With Quote
Old 08-25-2007, 07:05 AM   #12
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
Had toppers on previous SOB for 7 yrs and had no flapping or open/close issues. Just the unexpected "shower" when the DW pulled the slide in while I was under doing the Sewer job!

I won't have them again due to the cleaning issues underneath and they do start to get ratty-tatty after a few years, just about impossible to keep the fabric clean.

Cheers,
Bill
__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote
Old 08-26-2007, 09:09 AM   #13
igotjam
Senior Member
 
Join Date: Apr 2006
Location: Varies
Posts: 105
One of mine fell off on Friday (the 5 screws that hold them on broke off 1/4" from the head of the screw) Tried to take a screw out of another one to see what to buy and 3 more brke off. I gave up...Guess no awnings are the way to go.
__________________
2008 F-450
Aftermarket Brake Controller
2007 ES 36RE3 # 3702
igotjam is offline   Reply With Quote
Old 08-26-2007, 09:17 AM   #14
bstark
Senior Member
 
Join Date: May 2005
Location: Fergus, Ontario, CANADA
Posts: 1,000
To stop that from happening again, replace with slightly larger (stronger) diameter Stainless screws. you can paint the heads with white enamel nail polish to disguise the stainless heads.
__________________
Sandra, Bruce
bstark is offline   Reply With Quote
Old 08-26-2007, 10:27 AM   #15
jdwilson3
Senior Member
 
Join Date: Mar 2006
Location: Austin Arkansas
Posts: 399
slide topper

igotjam, slide topper screws breaking or pulling out of the wall is not unique to DT products. Helped a neighbor repair his toppers that ripped out of the wall on a Montana.
__________________
John & Peggy
1SG US Army Retired
jdwilson3 is offline   Reply With Quote
Old 08-27-2007, 10:23 PM   #16
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
I put a 1/2" hole in my toppers just behind the roller and centered. That lets the water drain and still keep all the debris from accumulating on the slide roof. Have not had any other problem but maybe that because Paul installed them, not production. More then I can say about the rest of the unit.
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 08-27-2007, 10:39 PM   #17
2 DA WDS
Senior Member
 
Join Date: Jun 2005
Location: Illinois
Posts: 527
I was wondering about putting a grommit in the low area. Is that what you have or is it just a hole?
__________________
Happy Trails To You
Tom & Cheryl Brockman S.O.I.T.C. Charter Member
2015 39DBRS3, Truma water heater, 2inch lift, custom paint
2011 RAM Cummins 3500 Dually
2 DA WDS is offline   Reply With Quote
Old 08-29-2007, 09:00 AM   #18
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
Quote:
Originally Posted by 2 DA WDS
I was wondering about putting a grommet in the low area. Is that what you have or is it just a hole?
I heated 1/2" metal rod (dill bit) and melted it though. That leaves no ruff areas for a tare to start.

I had discoloration from water sitting on top that showed me the best place to place the drain hole. No more sagging or showers when the slides come in.
4 years now and no runs, tares or rips.
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 08-29-2007, 10:43 AM   #19
DebDav
Member
 
Join Date: Sep 2006
Location: SE TX
Posts: 43
Also had one topper bracket break screws.

RETENSIONED topper and installed stainless screws - total of 8 per bracket.

Now topper is tight and until it stretches does not hold water.
__________________
2007 SB3 #3394
2005 F350 DRW
DebDav is offline   Reply With Quote
Old 08-29-2007, 11:25 AM   #20
2 DA WDS
Senior Member
 
Join Date: Jun 2005
Location: Illinois
Posts: 527
Thanks Hobo, that sounds easy.

DEBDAV, how do you retension the topper?
__________________

__________________
Happy Trails To You
Tom & Cheryl Brockman S.O.I.T.C. Charter Member
2015 39DBRS3, Truma water heater, 2inch lift, custom paint
2011 RAM Cummins 3500 Dually
2 DA WDS is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×