Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-12-2019, 10:38 PM   #1
tlerchba@sbcglobal.net
Junior Member
 
Join Date: Apr 2017
Location: Cypress, TX
Posts: 1
Black tank pull takes two hands and full body weight to open

2012 Keystone Avalanche,
The pull handle for my black tank is extremely hard to pull to open the valve to dump. I've tried dripping oil onto the cable to see if it may lubricate whatever is sticking, didn't work. Any suggestions would be greatly appreciated.
Thanks
Tim Lerchbacker
tlerchba@sbcglobal.net
__________________

__________________
Tim & Leesa Lerchbacker
Cypress, TX
2012 Keystone Avalanche
2016 Ram 2500, Diesel
tlerchba@sbcglobal.net is offline   Reply With Quote
Old 07-13-2019, 09:20 AM   #2
Stripit
Senior Member
 
Join Date: May 2005
Location: Home Prescott, Az
Posts: 1,019
Send a message via AIM to Stripit Send a message via MSN to Stripit Send a message via Yahoo to Stripit
Years ago when my pull handle was very hard to pull i tried to spray a lube down the cable. Might have helped a tad, but was still a bugger. So crawled under and removed the cover for access to the attaching point to the valve and straighten out the cable. Found it was easy to operate, so ran the cable a differnt direction, changed the loop the factory installed to run around, and then reattached. Fixed the hard pull. You might have a different issue? Valve could be sticky?
__________________

__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
Stripit is offline   Reply With Quote
Old 07-17-2019, 09:06 PM   #3
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
Tim,
First, welcome to the forum.
And if it is hard to pull, getting worse, now is the time to tackle fixing it BEFORE it breaks/stops working with the tank full....

I am not familiar with the Avalanche, so next is generic...
Gonna take some investigating on your part to locate the black tank and figure out where the valve actually is. If you aren't using the trailer for a while, after locating and figuring out how to access it, take it out cable and all and see if it can be rehabbed while out. Better yet, take it out, get a replacement, and be done with it.
Again, you know its getting hard to work, you can bet it will get stuck/break with the tank full--what a mess that can be.
Good luck.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 07-18-2019, 06:51 AM   #4
Notanlines
Senior Member
 
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
What Joe ^^^^ said. Buy a replacement cable and sheath. About $25 or so. Buy the longer one if you don't know the length, they can simply be cut to fit when you get it. PRE-LUBE the new cable with a heavy spray lube. NOT WD40. This existing cable will leave you in a lurch....
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
Notanlines is offline   Reply With Quote
Old 07-22-2019, 05:40 PM   #5
zqueenz
Junior Member
 
Join Date: Aug 2012
Posts: 3
Hi!! I had this same issue. My best friend fixed it for me and he said it was very easy once he found the gate valve location. Here is a link to help you fix the problem. http://www.doityourselfrv.com/repair...mp-gate-valve/

Hope this helps!! I know how frustrating this can be!!
__________________
2009 DRV MS 36TKSB3
zqueenz is offline   Reply With Quote
Old 07-22-2019, 11:00 PM   #6
Slow Six
Junior Member
 
Join Date: May 2010
Posts: 21
I had same problem on my MS. I bought a new valve and replaced the old cable operated one. I installed the new one so I could reach it without a cable. It slides easily now. I was fortunate that the valve is located so I could do this.
Slow Six is offline   Reply With Quote
Old 07-21-2021, 09:45 AM   #7
GMH
Junior Member
 
Join Date: Jul 2019
Posts: 7
I know this is an old thread, but my valves are all stiff also. I saw this stuff at Canadian tire. I haven’t tried it yet, but if I do I will update my post with results.
Attached Images
File Type: jpg 467E77E4-2AAF-4920-9C0E-1640FE4D0176.jpg (199.0 KB, 3 views)
GMH is offline   Reply With Quote
Old 07-21-2021, 09:30 PM   #8
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
A common problem on Suites fivers--the original valve cable is over-length and wound around the basement. Solution is to replace the valve/cable with a shorter length unit, and route the cable more directly to the handle location. Not a terribly hard job, just kind of tedious. Long arms will help, also need to take the water filter off to access the area.
Also, need to drain/clean the tank well, and tilt the trailer to the drain side before taking the old valve out.
__________________

__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Reply

Tags
black water tank, dumping, open, valve

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:37 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×