Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-20-2021, 05:35 PM   #1
routemaster
Junior Member
 
routemaster's Avatar
 
Join Date: Feb 2009
Location: Deming NM
Posts: 11
Send a message via AIM to routemaster
Bedroom slide out of line

This Sunday replaced the "Clip on wiper outside and inside Bal-Acuu unit I had installed the "T" style wipes first time this was way too stiff to operate through the gap, so therefore I removed them.There is no clearance for the flip, hence this is why wipes were tearing up at top left and bottom right.
From what I see checking the box is within specs. Then it looks to me like the box is laying down, inside to the right. The jams look plumb allthough the roof decking to the header does have a run of at least 1/4" to as best as I can check,the rough sill either was welded in wrong or the weld has broken.
If welded with that run on the rough bottom sill should I shim up the roller or screw some Delirn strips to the under side of the outside floor to bring back the walls plumb?
__________________
Chevy 2015 LTZ3500 C/C. L/B. DRW.
Landmark Arlington 365 2017 Silver.
routemaster is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×