DRV carpet replacement with washable product

[Dapperdan]

"Also this is no BS have the trucks alignment adjusted to set the toe to 1/32" toe in as the factory is set at 1/4" and WILL cause outside tire stepping. Rotation, NEVER touch the rears and rotate the fronts side to side with the ROTATION staying the same."

Wow Ron, you're spot on! I had to replace the front tires on my truck. RF started wearing on the outside edge!

Sorry for high-jacking this thread!

Dan

[Cummins12V98]

Originally Posted by Dapperdan

"Also this is no BS have the trucks alignment adjusted to set the toe to 1/32" toe in as the factory is set at 1/4" and WILL cause outside tire stepping. Rotation, NEVER touch the rears and rotate the fronts side to side with the ROTATION staying the same."

Wow Ron, you're spot on! I had to replace the front tires on my truck. RF started wearing on the outside edge!

Sorry for high-jacking this thread!

Dan

Good info is NOT hi jacking!!!

Trick is to rotate the fronts every 15K balance and rotate side to side keeping the rotation the SAME!!!

Never touch the rears.

[Dapperdan]

I get that Ron but I felt bad, this was TX Trio's thread about something completely different. I suppose good info is always welcome tho.

Dan