Off-set slide

[4happyfeet]

Has anyone had to have their slide re-aligned? The big street-side slide on my MS 41 RKSB4 has moved too far aft that the aft trim piece has bent when taking in the slide. The forward side allows cold air in in the winter. Is it a big deal to re-align? $$$$? Thanks

[SEzzell]

I think you are talking about the off-door side slide. Check that the bottom wiper seal has not been pinched by a roller and inspect rollers. Clean and lubricate the seals. The slide can be shoved back to center 0.5 inch or so. There is an adjustment at the ends of the extend/retract arm, but this should be last resort to correct.