drv2013 Leaking Bedroom Slide

[retired]

I feel like we have sealed everything, but still the front corner of the slide is getting wet!! Has anyone been able to fix this issue.

[R_Walker]

Look at the vinyl seal that moves when the slide goes in and out. I had the same problem, and it was because the seal did not face out when the slide moved out . the seal stayed "flipped in towards the camper when the slide was extended and created a path for water to get inside the seal.. Hope this helps as this is a fairly easy fix, and just requires a visual look-see when the slide is extended.

[terry and jo]

Similar to R Walker's comment, I found that on one slide that after extending it, I had to be sure that the seal/flap over the top of the slide had to be pulled out so that it covered the top of the vertical seal/flap on the back of the slide.


That said, our model is a 2010 one, so I don't know if it is the same as yours. And sadly, we are on our Summer job and in Oregon, so I can't take a picture of the two seals/flaps to clarify what I speak of.