Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 

Go Back   5thWheelForums.com > 5th Wheel Brand Forums > DRV | Formerly Doubletree
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-29-2019, 07:12 PM   #1
lucypistole@gmail.com
Junior Member
 
Join Date: Sep 2019
Posts: 3
Question DRV dryer vent outside cover?

We own a 2017 drv memphis 44 and would like to clean the dryer vent from the outside. Does anyone know how to remove the dryer vent cover on the outside?
__________________

lucypistole@gmail.com is offline   Reply With Quote
Old 09-29-2019, 07:36 PM   #2
RVStrayKatz
Junior Member
 
Join Date: Jun 2018
Posts: 14
We have an Elite Suites, full body paint, and that vent doesn’t come off for cleaning. I clipped a small section of screen out so I can reach in with a set of pinchers and clean out any lint.
__________________

RVStrayKatz is offline   Reply With Quote
Old 09-30-2019, 07:21 AM   #3
porthole
Senior Member
 
Join Date: Jun 2009
Posts: 465
While in Indiana I picked up at Menards a flexible shaft vent brush, made to use with a drill on low speed.

Turn on dryer, run brush from outside, stand to the side

Look similar to this

https://www.amazon.com/Deflecto-Clea.../dp/B00IB4BMDQ
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
porthole is offline   Reply With Quote
Old 09-30-2019, 02:50 PM   #4
RVStrayKatz
Junior Member
 
Join Date: Jun 2018
Posts: 14
Vent cleaning

Quote:
Originally Posted by porthole View Post
While in Indiana I picked up at Menards a flexible shaft vent brush, made to use with a drill on low speed.

Turn on dryer, run brush from outside, stand to the side

Look similar to this

https://www.amazon.com/Deflecto-Clea.../dp/B00IB4BMDQ
Interesting idea but in my experience the run from the dryer to vent is short and straight. The only place I get any buildup is at the vent screen itself.
RVStrayKatz is offline   Reply With Quote
Old 09-30-2019, 02:59 PM   #5
porthole
Senior Member
 
Join Date: Jun 2009
Posts: 465
Quote:
Originally Posted by RVStrayKatz View Post
Interesting idea but in my experience the run from the dryer to vent is short and straight. The only place I get any buildup is at the vent screen itself.
Guess all trailers are different then.

Ours benefited from using that brush.
BYMMV
porthole is offline   Reply With Quote
Old 10-02-2019, 10:56 AM   #6
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
My first experience with the Splendide dryers was when I bought a used '15 RSSA. Dryer quit drying soon afterwards. New one worked well, then seemed to be getting worse at drying--decided to clean vent, found the flap locked closed. Apparently, previous owner/dealer never checked it, probably why first dryer went out. Dug out lots of lint, now no problem other than slow times for 110 dryer, and vent is easy to clean after use.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 10-02-2019, 07:35 PM   #7
lucypistole@gmail.com
Junior Member
 
Join Date: Sep 2019
Posts: 3
I know our flap is working. Do you have a special way of cleaning the vent? We have a vent brush that is attached to an extended handle and I was thinking about wrapping it in something soft, so as not to damage the dryer hose.
lucypistole@gmail.com is offline   Reply With Quote
Old 10-03-2019, 11:07 PM   #8
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
Our vent line is only about 6" long, rest is thru the wall. Easy to clean.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 10-04-2019, 07:14 AM   #9
porthole
Senior Member
 
Join Date: Jun 2009
Posts: 465
Quote:
Originally Posted by lucypistole@gmail.com View Post
I know our flap is working. Do you have a special way of cleaning the vent? We have a vent brush that is attached to an extended handle and I was thinking about wrapping it in something soft, so as not to damage the dryer hose.
Did you see the brush I linked to above?
The bristles are soft and won’t damage the vent, unless you get rammy with it and push it through the hose.
porthole is offline   Reply With Quote
Old 10-05-2019, 10:33 AM   #10
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
They all come off. I know they have used different brands over the years, so yours may be different from mine, but on mine:

1. Take a razor and cut the paint and caulk around the outside edge
2. Tap lightly on the bottom edge, pushing it up slightly.
3. Swing it up like it is hinged at top.
4. Pull outward.

It went on so it has to come off in reverse no matter the brand or type paint. It was actually probably installed after paint and caulked on.
Good luck

Bill
porkchop is offline   Reply With Quote
Old 02-22-2024, 03:47 PM   #11
OneReallyOldGuy
Senior Member
 
Join Date: Mar 2018
Location: Georgia
Posts: 158
Dryer vent hose detached

I hope y’all see this reply. My dryer vent hose has detached from the dryer. The only way I can think of to fix this is to pull the exterior vent cover off and reach in to reattach it.
How do I get the vent cover off?
Any other suggestions?
I’ve attached photos. One is behind the dryer, inaccessible as far as I can see, one is inside the vent shot from outside and one is the cover.
Attached Images
File Type: jpg FullSizeRender.jpg (114.6 KB, 6 views)
File Type: jpg IMG_4613.jpg (135.4 KB, 3 views)
File Type: jpg IMG_4614.jpg (126.6 KB, 3 views)
OneReallyOldGuy is offline   Reply With Quote
Old 02-22-2024, 06:54 PM   #12
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Read the answer right above your post


Bill
porkchop is offline   Reply With Quote
Old 02-22-2024, 07:51 PM   #13
porthole
Senior Member
 
Join Date: Jun 2009
Posts: 465
Pull the dryer and use one of the magnetic dryer hose connectors.

https://www.amazon.com/MagVent-MV-18...s%2C136&sr=8-3

https://www.amazon.com/MagVent-MV-90...s%2C136&sr=8-4

https://www.amazon.com/Adapter-Cover...36&sr=8-8&th=1
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
porthole is offline   Reply With Quote
Old 02-25-2024, 01:37 PM   #14
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 1,201
If you have the Whirlpool Dryer and you remove and clean the lint filter that is NOT all that you should be doing! My dryer was not drying well so I started looking for a replacement and the guy at Lowe's said to look behind the filter there is a wire screen that could be blocked. Sure enough it was basically clogged from 6 years full time use that the small amounts that passed the filter had added up. Still working like new after 8 plus years full time usage.
__________________

__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:38 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×