Quote:
Originally Posted by Grampie
2) Where can I find weights and measurments? I can't find them on company site.
Thanks,
Grampie
|
When you check out the specs, the measurments are fine, but be carefull with the weights. The wts posted are not very close to real world wts. Most that checked have found the actual wts to be quite a bit higher right out of the dealer. Our 38RL3 was over 1400lbs heavier and pin wt was 300lbs more than spec sheet. Suggest you go by the max GVWR 18K-20K depending what model and expect the pin to be very heavy, 3400-4000lb range. This is for MS and ES.
The SS will be less, not sure if they are closer to the spec sheet info.
I was expecting the spec wts and was not pleased to find the real wts. I had not found the forum before we bought. At least I would have been informed. Dealer was no help.
Bill