|
I replaced mine last night. Got the new one from Sears and it is similar to the one I had. I had to pry off the trim piece at the top as it was stapled (no screws). There was a long bracket mounted to the top of the Microwave which had 6 screws through it into a board which was connected to the ceiling. After removing those screws it just swung down. (It's heavy so make sure you have help) New one went in just like the old one. Bracket fit in the same holes on the new one and I used the old mounting plate on the wall. No, I didn't have to remove the vent from the outside.
|