Quote:
Originally Posted by anijet
My MS was ordered with disc brakes. When it was new I never thought the brakes worked that well. After 3 years the ActiBrake (I think that was the brand) actuator failed and I installed a Carlisle unit. After that the brakes worked great. Last year I had the MORryde IS suspension installed. Since I wanted to get rid of the Nev-R Lube bearings I had them install new hubs/discs and calipers. They were almost identical to the originals installed at DRV. These new ones stop ok but a little more lag. I'm going to bleed them and see if that helps.
|
I advise bleeding for sure! I also advise replacing the pads with NAPA or RayBestos basically top quality. The pads need to be their BEST quality "Sem Metallic" pads. The pads that come with your system are JUNK!!!