|
Morryde IS adjustment
I'm looking at raising the Sear Spring to the top hole (one inch) on the mounting bracket. This would lower the trailer one of two inches desired. The axles are 8K.
My question is; Does the Torque Arm apply downward force when Shear Spring bolts are removed from Hanger ass'y. Are there other problems I could find. Presently the RV is on blocks ready for a wheel bearing repack.
When I ordered the 2016 MS 38PS9, I had a Ford Dually so a 2 inch rise was installed on the RV. Now I have a M-2 Sports Chassis and always wanted to raise the Truck hitch an extra two inches. I didn't like the options.
Clay
|