5thWheelForums.com - View Single Post

thompsj · 07-28-2007, 05:39 PM

dz06
I was worried about the IBC in my F350 and the Dexter actuator in my 2006 MS working together. An email to Dexter provoked this response:

"On 3/20/06, Belisle, Duane <DBelisle@dexteraxle.com > wrote:
J. Charles Thompson,
The DEXTER AXLE Electric over Hydraulic actuation (units made after March 2005) is compatible with the Ford Integrated Brake Controller. There are some units made by other manufactures (and some earlier Dexter Units) that are not compatible. For this reason Ford chose to not to endorse some units and not others so they published what they did in their manual. They most likely also did this for liability reasons.

Duane Belisle
Dexter Axle Product Engineer
574-296-7334
574-296-7320 Fax

07-28-2007, 05:39 PM	#7
thompsj Junior Member Join Date: Apr 2006 Location: Las Vegas, NV Posts: 4	dz06 I was worried about the IBC in my F350 and the Dexter actuator in my 2006 MS working together. An email to Dexter provoked this response: "On 3/20/06, Belisle, Duane <DBelisle@dexteraxle.com > wrote: J. Charles Thompson, The DEXTER AXLE Electric over Hydraulic actuation (units made after March 2005) is compatible with the Ford Integrated Brake Controller. There are some units made by other manufactures (and some earlier Dexter Units) that are not compatible. For this reason Ford chose to not to endorse some units and not others so they published what they did in their manual. They most likely also did this for liability reasons. Duane Belisle Dexter Axle Product Engineer 574-296-7334 574-296-7320 Fax __________________ Chuck & Rita 2006 Mobile Suite 36 TK3 #2698 2006 F350 Lariet, 6.0L, DRW, Tow Boss, 24K Husky Hitch