|
"Landing Jack Problem Solved"
With the help of member "ANIJET" (Leo) I was able to repair the the inoperable front landing jacks.
The problem was a failed switch. The switch is a double throw, double pole, momentary off center position switch. On my 32TK3 it was nearly impossible to access the panel that holds the switches. But, with Leo's constant support and pictures I replaced the faulty switch. Actually, I replaced both the front and rear switches.
In summary, the panel holding the switches must be removed to access the switches. I strongly suggest that pictures should be taken and notes made to identify the wires and their respective connecting points. With the panel removed, the switches can be gently pried from the panel. Replacing the new switches requires gently pushing them onto the panel.
My personal thank you to Leo. I owe you big time; if ever our paths meet, I'll thank you personally.
Larry in Spokane
|