[MDTdriver]

Hi I have a Xantrax Freedom 2000 watt. Inverter Here is how mine to connected.
Inverter should not be in same compartment as batteries.
Inverter charge circuit to batteries.
AC power to inverter from 30amp breaker in trailer breaker pannel.
AC output power to three 15amp breakers in trailer breaker pannel. (these will be the only appliances to work of inverter) no air conditioning/frig. or thing drawing more than 20amp.
Run netural wires from inverter to netural block in trailer breaker pannel.
This is a general overview of what to do. You should have a wiring diagram with our inveter if new. If not find one you will understand this better.
Hope this is of some help.

Larry & Kathy