It has to be a check valve in the lines that stops flow from the lines to he tank. My guess is it has to be in the area of the pump. There should be a one way valve to prevent flow backwards into the tank from the pump. Try running the pump a bit and see if it seals up again.
I had a situation last summer that had me scratching my head. I keep the fresh water at 1/3 tank. I went to fill it since we were going to be dry camping a while and found the tank to be full and I had no recollection of filling it. Since we were in a park with full hookups I had no reason to fill the tank before that time. I was wondering if a bit of grit got into the valve and propped it open. It has not happened since.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|