|
Take off the lower louvered panel on the side of the RV. The circuit board is located on the lower left under a black box about 6 by 5 inches square. box itself has a diagram as to how the box should be opened. Basically you pry it open by inserting a screw driver in a slot.
When you see the board, there are terminals . The ones on the left are numbered J1 to J5. The DC power uses these. The ones on the left are AC and are numbered J6 to J12 (or something like that).
The 5 amp AC fuse is above the J6J12 terminals. The 3 amp fuse is to the left of the J1 terminal--it is a little harder to see and get at.
|