[Stevencoles]

I’m going to guess by your post that the first part of the steps will extend but not the second. After living with this issue I finally discover that the cause is a failure of the actuators that pull the levers to release the second set of steps. You maybe could get the actuators replaced, but the immediate fix is simple. When the first steps are extending manually reach around both sides and unhook the levers that lock the steps in place, this will allow the steps to continue to deploy. When they are completely down you have to lift the bottom of the steps to engage the levers. Also some WD40 on the levers will help. Crawl under the steps with a flashlight before you try this and you will see how the mechanism is supposed to work.