View Single Post
Old 12-12-2016, 06:03 AM   #2
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
Sorry that you are having trouble with a new unit. You might consider the use of Eternabond over all the corners and seams of the slide. Also, check closely the rubber seals that go all around the slide for fit--there probably is some place that is not sealing close against the slide.
I doubt that the extra 'seal coat' that CW applied was anything more than a money-maker for them.
Look around the bottom of the slide for any metal strips/screws/flanges that might have a lip that water could get under and use a good caulk (Dicor) that doesn't shrink.
Outside of that, don't know what else that would help.
Good luck, and for future work--a lot of people on the RV internet forums DO NOT let CW work on their units...
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote