View Single Post
Old 10-08-2016, 10:06 PM   #1
cocobolo
Junior Member
 
Join Date: Oct 2016
Location: Oklahoma
Posts: 1
12V lighting problems

I suddenly experienced power problems to my lights in the kitchen and living area slide outs. The problem is a short the blows the fuse on one side and no power or blown fuse on the other side. I replaced the blown fuse and several days later it blew again. So, I started by check my slide wiring on that side by isolating the feed and running a new pair on the floor. Seemed to work ok until I went on a short trip and it blew another fuse. I am ruling out wiring as the cause at this point.

Could this be related to;

1. Spurious problems with the fuse board, or
2. Faulty wall switches leaving an open circuit with occasional short circuit?

The switch are rocker type wall mount and I can't figure out how to pull them out without considerable prying force. Does anyone have any experience with a similar problem and how to you remove the switch without causing marring on the wall?

Thanks for any help provided.
cocobolo is offline   Reply With Quote