5thWheelForums.com - View Single Post

**wingnut60** · 09-17-2011, 07:34 PM

If you have had this unit for a while, has there been any odd wheel wear?

One ballpark way to check axle placement is to pick a dead-center point on the front of the frame and measure carefully to the same point on both sides of the front axle--should be very close.
Or, take it to an spring/axle shop to have it checked.

Have not heard of this in the forums on MS models.

Joe

09-17-2011, 07:34 PM	#2
wingnut60 Site Team Join Date: Sep 2005 Location: Where we park it Posts: 2,838	If you have had this unit for a while, has there been any odd wheel wear? One ballpark way to check axle placement is to pick a dead-center point on the front of the frame and measure carefully to the same point on both sides of the front axle--should be very close. Or, take it to an spring/axle shop to have it checked. Have not heard of this in the forums on MS models. Joe __________________ 2016 Tiffin 40 QBH 2015 38RSSA, traded 2005 TK3 #1869, 10 yrs of memories, 2017 F450 KR--one more Ford is it 2009 F450 4x4-died; 2010 F450-retired