|
I would start looking at the Splitter it's self. Check the connections on the back. You can see where the ant. input is on the back. Then the selector buttons on the front transfer that ant. connection to which ever connection is selected. That connection has a cable going to whatever has been selected, VCR, Bedroom TV, or whatever is selected. Make sure that the cable to the ant. connection is good If nothing is working (VCR-DVD) bedroom TV etc. I would look into a new Selector switch (splitter). Also you might use a multimeter and check the cable at the ant. to see if 12v dc is there. Check between the outside of the connector to the pin inside. This is what I would do to check it out.
Okie
__________________
Okies on the road
15 Columbus 381FL
08 F450
|