Thread: Off-set slide
View Single Post
Old 08-08-2022, 07:43 PM   #2
SEzzell
Junior Member
 
Join Date: Apr 2017
Posts: 5
First Check That Slide is Moving Freely

I think you are talking about the off-door side slide. Check that the bottom wiper seal has not been pinched by a roller and inspect rollers. Clean and lubricate the seals. The slide can be shoved back to center 0.5 inch or so. There is an adjustment at the ends of the extend/retract arm, but this should be last resort to correct.
SEzzell is offline   Reply With Quote