[Cheif 2]

The main concern I would have is that of the brakes. Being that the unit has been sitting for so long the calipers have not moved on their slide pins and they may be hung up enough not to work properly. If possible I would have the caliper pins lubed which will require removing each of the wheels to get to them. You also will be able to get a much better look at the tires that way and while the wheels are off I would lube the suspension. The issue I found with the bearings on my 2007 was that they were not properly torqued at the factory, so that would be another matter I would address before towing it. Did the prior owner have the recall with the paint issue on the rotor hubs addressed? Make certain you retourque the wheels to the proper specs also. Good luck with your purchase. We love ours.