Thanks, Dan. For anyone following this for advice, I removed the vent from the bathroom and had a visiting neighbor install it in place of the broken one in the dining room. I can reach and replace the b/room vent. There is an outer trim ring, use a flat blade screwdriver and pop it off, working all the away around it. Be careful not to gouge the ceiling vinyl or break the ring. There are 4 screws holding the vent. And here is the link to that exact vent by mfg number:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
There is also a 1.5 inch collar/sleeve that is snapped on the back of the vent. When you receive the replacement, snap on the collar, screw in the 4 screws, and snap on the trim ring.
__________________
'17 36RSSB3///2012 F350 KR, LWB/SRW, Bilsteins, antisway bar, Bilstein steering stabilizer, Airlift air bags, wireless compressor, 295/20 tires at 4080 pounds each, oversized finned aluminum diff and trannie pans, synthetic fluid, KEM, PIP, & Tyrant tunes w/SCR4 programming, Edge CTS gauge monitoring, G37 2017 turbo, ATS Stage I transmission.
|