View Single Post
Old 05-16-2005, 10:21 AM   #2
Rusty
Junior Member
 
Join Date: May 2005
Location: Cold Lake Alberta Canada
Posts: 21
First what you need to do is upload them to a "Host" site, meaning a website that you can post them on the Internet, there are several free host sites out there, I use Snapfish (www.snapfish.com)

Then what you need to do is right click on the image after you upload it to the host site, then select "properties at the bottom of the list/selection, select the "Properties" option, now you will get a box that pops up with all the information on the file itself (as shown below), highlite the filename as I have done, right click on the highlited section and right click again (do not click on anything until after this next action), and after right clicking on the file name choose "Copy".



Now go back to your reply box here on the forum, choose the option that is just up to the right of the reply box that you are typing in, there is a button named "Img", click that once, then you are going to get something that will look like [img], right click just after that symbol and select "Paste", what you are going to get is the filename that you previously have copied, it will look somewhat like this: h t t p: //images.snapfish.com/34243%3B8323232%7Ffp64%3Dot%3E232%3A%3D479%3D%3B38 %3DXROQDF%3E232363%3A863%3B46ot1lsi.

Then what you need to do is select the [img] again, that will close the tag so to speak.

And voila, there you have it.......

Rusty is offline   Reply With Quote