Quote:
Originally Posted by anijet
Good thing you picked up that spare pack!
|
It sure is good I had the part and come to find out if it was made after 2013 it has 15 teeth and before then was 18 teeth. Joe knew what he was doing when he bought his and then sold it to me. Anyway, ITS FIXED!! My gear pack had three broken off teeth right in a row. Looking back on the job it was almost as much work taking the belly down and putting it back up to get to the gear pack as it was to change it out. It fought me a little then I discovered the drive shaft moved a little in so I could mount the gear pack and then pull the drive shaft over to put the bolt thru.
A good thing to know is the drive shaft is square and if the slide will not go in you can use a wrench on it and turn the shaft. I'm guessing it would be quite a workout but if you have to you have to.