Quote:
|
Originally Posted by tomriley
Does anyone know if changes to the shocks are required if the suspension height is changed to the lower set of holes (raising the trailer ride-height)?
Since this would require longer shock travel, was wondering if the shock travel limits would be exceeded.
|
Nothing has to be changed on the shocks when you lower the the spring shakles to the low holes.
The factory lowered mine in order to keep the shocks from bottoming out. I had damage 3 of the 4 shocks, replaced them and damaged the new shocks before getting back to the factory for their cure.
They had also replaced the spring when I was in AZ thinking they were bad but that was not the case.