|
Welcome and congrats on your new MS!!
As Mike said, getting the rig weighed is a good idea, Stacey can fix you up!
Until you are able to get accurate side to side wts, there is an easy way to set your Trailair CP suspension, When looking at the air bags and the brackets that hold them from in between the tires from the outside, (make sure the trailer is hooked up to the truck and on level pavement) Just inflate them until you get the gaps equal on each side of the bags, basically no angle forward or aft. Experiment a bit and you will see how it changes with higher and lower air. Even them up and note the pressure for each side and that should be pretty close. Mine run at 65 and 75 PSI. But yours will be a bit differnt.
Bill
|