|
Joe, The res should be about an inch from the top when all slides are in (unless the BR slide is like ours, then the BR has to be out.) All Jacks up. Have a look under the bed to see when the BR slide act is retracted, in or out. They changed it at some point. ATF fluid like Dextron (any number is fine)
When Jacks are up and sides out, the res should maybe have more than an inch. Like 2"....but always fill when jacks up and slide act retracted.
It may be low, or have air in it. Maybe exercising the jacks and slides will fix it.
|