|
Gemstone.
I helped Jack in Alaska fix the same problem as you are having. We removed the door and built a drill setup to remove the track and then bored extra holes and used the (Jack's design drill setup) to screw the track in place. It was a 2 man job with a few extra words at times. Then jack built up the bottom to allow the holding pin to go deeper and not let it jump out. Of course the screws that came out of the track were at the back. If you need the thin wrench to adjust the front and back rollers I can send you one. I have installed many of that brand of pocket doors in new homes and of course I could not throw away a tool.
chevman
__________________
chevman
|