Squeeks in Bathroom area

[mloftin]

Just took delivery on our new 2008 MS 38RL3 did not notice at the time we pick the unit up but now we have a floor/vanity that squeeks pretty load when you walk by I saw somewhere on this forum about repairing a squeeky bathroom floor but now can not find the post any ideas on how to fix or should I just get the dealer to handle..

[ponch]

I had the same thing in our 05. Ours was the trip at the bottom of the vanity. Take it off and reinstall it slightly high. Yea it worked!

Ponch

[Jim1941]

Before taking it off take a putty knife and just pry it up a hair along the bottom.Worked for me.

[Suitedreams]

We had the same problem with ours. Called DT and was told to pull up the quarter round trim, use silicone caulk on the floor and cabinet side of the trim, renail the trim down. Apparently, the floor flexs a little causing the trim to rub on the cabinet. Note, try to pull the nail from the back side. If you push the nail back though the front side, it could blow out the trim. The nails are used till the silicone sets.

[mloftin]

Hey guys thanks for the info I think that is what my squeek is also..

[mloftin]

Hey guys thanks for the info I think that is what my squeek is also..

[mloftin]

Took the advise and went home last night and repositioned the 1/4 round moulding and no more squeek..


Thanks for the help