View Full Version : Shower door seal
neattoolman
07-13-2007, 11:30 AM
My shower door seal is torn. Anyone know where you can get a new one or do I need to call the factory? If I have to call the factory does anyone have a point of contact?
Thanks,
Marty
I would first check with any dealer, I think the seal is pretty standard and just slips into a grove and then cut off what is not needed. If I'm wrong I'm sure someone will jump in here to set me straight.
bstark
07-13-2007, 05:54 PM
Don't tell anyone where you heard this :wink: but, visit your friendly neighbourhood Home Depot or Lowes and spend a bit of time loitering around the shower displays and if one of those seals should jump into your pocket well - - - :P
Kidding aside, I believe they are a standard item as RonS says and NOT unique to our showers.
keithandpenne
07-14-2007, 09:11 PM
You might check with Linda, in parts at Bennetts RV,
http://www.bennettsrv.com/index.html
Ph 817-279-7500 or 800-281-1711.
She had qouted me around $2.19 ft.
PSD_Tweaker
07-15-2007, 01:24 PM
:lol: Do you mean the seal that makes the door a major PITA to open...
On mine you have-ta give the door a full-on yak to ge it open.
I simply cut mine away..... :oops:
Rick
neattoolman
07-24-2007, 11:17 AM
Cutting the seal away doesn't cause a leak on the floor?
PSD_Tweaker
07-26-2007, 12:37 PM
No leak on the floor in my shower! :lol:
Of course I do make sure that the spray does not ever shoot directly at that un-covered door bottom.
Just regular shower use never causes a problem at all.
I know some may think otherwise, but I kid-you-not.
That seal was bugging me large, every opening & closing was a far from smooth process, it's fine now.
Rick
vBulletin® v3.8.8 Beta 4, Copyright ©2000-2024, vBulletin Solutions, Inc.