billr
05-19-2007, 10:47 PM
When we arrived at the rally in Branson, noticed a good size leak at the top of the left side rear stabilizer hyd jack. Turned out to be a cracked fitting that is on top of the hyd valve body. (this is the 05 type hyd jacks with square legs) Was leaking under suction, retract side. So we were grounded.
A call to Kent at DT followed by a call with Van at Lippert had a new fitting here in 2 days. Fix was quick. Then a DT rep that came to the rally brought another fitting down just in case.
Don't hesitate to call Lippert, they do look after you. (you will have to wait several hours for a return call) due to the call load.
Cheers,
Bill
A call to Kent at DT followed by a call with Van at Lippert had a new fitting here in 2 days. Fix was quick. Then a DT rep that came to the rally brought another fitting down just in case.
Don't hesitate to call Lippert, they do look after you. (you will have to wait several hours for a return call) due to the call load.
Cheers,
Bill