PDA

View Full Version : Ceiling AC vent


clev
07-08-2020, 08:22 AM
I was attempting to adjust one of the round vents with the end of my cane, and succeeded in breaking the louvres. Where can I get a replacement? The outer measurement is 6 inches, and the inner hole with louvres is 4 inches.

Notanlines
07-08-2020, 11:01 AM
http://www.amazon.com/dp/B07HRX993L/ref=tsm_1_tp_tc
Here you go!

clev
07-08-2020, 11:26 AM
Thank you, Notan. That one is currently unavailable. Also it has 4 screw holes; mine don’t have screw holes. I guess that they push/snap into place.

clev
07-09-2020, 02:14 PM
Anyone else have knowledge of these vents? Could use some advice. Do they screw in, pop in, or glue in?

Dapperdan
07-09-2020, 09:23 PM
Clev, this looks closer to what we have. https://www.amazon.com/dp/B0095TEFNA/ref=dp_cerb_3

I'd have to double check for sure though, it's been a while since I looked closely at ours.

Dan

clev
07-12-2020, 03:03 PM
Thanks, Dan. For anyone following this for advice, I removed the vent from the bathroom and had a visiting neighbor install it in place of the broken one in the dining room. I can reach and replace the b/room vent. There is an outer trim ring, use a flat blade screwdriver and pop it off, working all the away around it. Be careful not to gouge the ceiling vinyl or break the ring. There are 4 screws holding the vent. And here is the link to that exact vent by mfg number:

https://www.amazon.com/gp/product/B005GOPT0G/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

There is also a 1.5 inch collar/sleeve that is snapped on the back of the vent. When you receive the replacement, snap on the collar, screw in the 4 screws, and snap on the trim ring.

pterrydactyl
07-13-2020, 04:30 PM
If the louvered turntable vent just snaps it’s probably a Valterra product.

Valterra A10-3345VP Rotating Heating and A/C Register,White https://smile.amazon.com/dp/B07D2Z8HBV/ref=cm_sw_r_cp_api_i_7indFb0M8AZAC

clev
07-13-2020, 05:53 PM
Thank you, pt; probably a lot of the choices will work. I called Debra at DRV parts and she gave me the manufacturer and part number. The link that I posted is the oem replacement.