Shower Door Vinyl Seals [Archive]

View Full Version : Shower Door Vinyl Seals

lseiger

11-16-2019, 04:12 PM

We have a 2007 MS 32TK3 and I would like to replace the vinyl shower door bottom seal but cannot find a seal that fits.

The bottom door seal is a T-type with an angled seal.

If I did the attachment correctly you should be able see what I am looking for.

I can find seals that measure 1/8" x 1/4".

I need a seal that measures closer to 1/32" x 3/16".

Any help with this will be appreciated.

Wingnut, if you're listening, Hello from Larry & Barb (Lockhart State Park)

Larry Seiger
Yuma SKP Park

Cummins12V98

11-16-2019, 06:32 PM

Seems there is a brand name on the shower door somewhere.

wingnut60

11-16-2019, 06:48 PM

Try this link:

http://www.5thwheelforums.com/forums/showthread.php?t=2574&highlight=shower+door

Larry,
Great to hear from you. Kind of wish we still had our '05 TK3. Also wish we were in Yuma area--stupid staying in cold areas...

anijet

11-16-2019, 08:58 PM

wingnut60

11-18-2019, 10:29 AM

Leo,
Darn it, you are ruining my chance to be a hero...
I just gotta notice these post dates before jumping in.
Thanks,
Joe

lseiger

11-23-2019, 06:30 PM

Hi all and thank you for your suggestions.

I have followed all of your leads to no avail. The bottom show door seal on our unit has a very narrow slot (1/16").

I did contact DRV and here is their answer:

" You will need to contact the manufacturer of the shower. I'm guessing it was Frontline back then.
We do not have any bills of material that date back before 2015.

Brandi Fought
Parts Advisor | Customer Services
DRV, LLC. "

I found 3' long seals ay Home Depot that by using two of them I was able to replace the side door seal. So, I'm good to go on the side seal.

The bottom door seal is not a big issue. I may end up using a adhesive backed seal.

So, all is good, thank you again.

Larry Seiger
KOFA SKP Park, Yuma, AZ

stanleyz

11-25-2019, 09:41 PM

I called MS parts department and they sent me about 10 or 12 feet for mu 06.