2011 36RSSB3 kitchen pendant shades

[MTK46]

Wife would like to replace the 3 shades with something with a little more color.
Have looked on-line but everything we find is for 120v lights. Fitter size is too big. Our 12 v ones are 1 1/8"
aka https://www.destinationlighting.com/item/cylinder-art-glass-shade-lipless-1-inch-fitter-opening/422016?gclid=CjwKCAjwwZrmBRA7EiwA4iMzBHSx6uGN_6qhd oi77B9jS1qKP4uGyx9nN1FA3_G2mc9_on4LgarirBoCzzgQAvD _BwE

[porkchop]

I have replaced these several times. Bought from big box lumber yard every time. The only concern is the diameter of hole. Voltage does not make a difference. Good luck

Bill

[MTK46]

I have replaced these several times. Bought from big box lumber yard every time. The only concern is the diameter of hole. Voltage does not make a difference. Good luck

Bill

Bill that's my problem everything I find at Home Depot or Lowes
has 1 5/8" hole not 1 1/8" which the RV ones have.

[porkchop]

Stretching my memory I think I remember that problem. I believe what I did was to get a fairly thick piece of felt and cut the inside hole to fit the socket rather tight and the outside diameter large enough to keep the glass up. Took a few cuts to get it all correct but never had a problem with them falling during travel. Just cut the outside large enough to wedge it together. Found the felt in the sewing isle at Walmart. Good luck

Bill

[MTK46]

Thanks Bill I'll pass this along to my wife.