PDA

View Full Version : New to here


Mechanic
09-12-2016, 08:28 AM
My wife and are owners of a 2017 40KSSB4,4months now.

wingnut60
09-12-2016, 12:11 PM
Very nice--keep in touch here and let us know how you like it.
Welcome...
Joe

Mechanic
09-12-2016, 03:22 PM
I have been reading the forum for a while. We have a 41 ft M/S 4 months old 2017,and so many major problems the dealer told us today he was going to replace it with a brand new one. Can Am R/V, London Ontario Ca. Owned by Andy & Kirk Thompson, GREAT DEALER.

wingnut60
09-12-2016, 05:48 PM
Yes, that is a great dealer...now, how about the manufacturer? What is your opinion of them?

What has been the nature of your problems?

Joe

Mechanic
09-12-2016, 06:22 PM
DRV. We took the factory tour two weeks ago, the material quality is there workmanship needs to slow down for this kind of $. They said most of my problems came from the frame loosing the camber, dropping down behind the axles, causing the three big slides to have problems, shaking the inside and outside apart. Can not keep screws in rear cap moulding, all outside compartments fell out. Spent the day at LIPPERT, they cut the frame behind the wheels and welded plates on the frame after jacking it up to supposedly put camber back in the frame.
Chuck

wingnut60
09-12-2016, 09:39 PM
So, after all the work by Lippert, you are still going to get a new unit?
First time I heard of actually getting a replacement.
Hard to understand how the frame could get so badly out of whack...
Hope it all works out for you.
Joe