No 12v lights in rear slides

[don a]

2008 36 sbtk3 need help with 12v lights on both rear slides also dometic refrigerator not working that has no 12v going to it. blowing 20amp fuse looked under slides for 12v wire loom did not find any chafing or bare wires. any info would be great thanks don

[Stripit]

Under my kitchen slide was a junction box, actually there were two stacked an inside one of the boxes was the 110 power and the other was the 12 volt box. Remove the covers and inspoect for a loose connection.

[don a]

under kitchen slide there are 2 junction boxes both are 110v also on the frame under the kitchen there 3 more boxes these are also110v. the rear of slide there is a wire loom with 12v wires. looked for any chafing or exposed wires did not find any. will look at wires on other slide today. no 12v to both slides

[jcasey]

i just investigated a similar problem today. In my case, the two wall outlets in the dinette slide were showing low power--c. 78 volts instead of c. 125 volts. The problem was not present at the other outlets in that same circuit/loop. We traced the problem to the junction box under the dinette slide out. (2011 36 ft. DRV) In our trailer there are two junction boxes in that location: one on the frame and one under the outer edge of the slide out. We used a new, larger/more suitable wire nut on the "neutral wire" connection; and that seemed to solve the problem.