PDA

View Full Version : Wiring Diagram

kenscomet
08-13-2015, 11:15 AM
Hi All
Does anybody know where I can get a copy of the Wiring Diagram for a 2015 Mobile Suite RSB3 :confused:
Willym
08-13-2015, 04:48 PM
As far as I know, wiring diagrams are not available. What do you need to know?
wingnut60
08-13-2015, 08:59 PM
I think Willym is correct--mostly the wiring is done based on who is on shift at the time.
Might scare you when you begin looking under drawers/cabinets at what is there.
Joe
kenscomet
08-13-2015, 09:56 PM
I think Willym is correct--mostly the wiring is done based on who is on shift at the time.
Might scare you when you begin looking under drawers/cabinets at what is there.
Joe
WINGNUT60 You were right started looking in man cave it sure looks like a 2 year did the work
golf_bears
08-14-2015, 08:24 AM
What specifically are you having an issue with? Lots of talent in the MS group that can help.
kenscomet
08-15-2015, 10:46 AM
We are having problems with low voltage but at the campground box the voltage seems fine, I just wanted to check for loose connections and such. Looked in storage compartment were all the tanks and heaters are (WHAT A MESS)
wingnut60
08-15-2015, 03:27 PM
You are saying you lose significant voltage from the pedestal to the EMS readout?
Kerry
08-15-2015, 09:18 PM
The EMS read outs are under load conditions. What are the voltage readings at the pedestal. Hot 1 to gnd, hot 1 to neutral, hot 2 to grd, hot 2 to neutral, any voltage neutral to gnd. Voltage hot 1 to hot 2. What are you calling low voltage.?
kenscomet
09-05-2015, 09:13 AM
The EMS read outs are under load conditions. What are the voltage readings at the pedestal. Hot 1 to gnd, hot 1 to neutral, hot 2 to grd, hot 2 to neutral, any voltage neutral to gnd. Voltage hot 1 to hot 2. What are you calling low voltage.?
under load voltage drops to 105 (that's with just the water heater on )
Willym
09-05-2015, 11:27 AM
Presumably you are measuring the voltage in the trailer. Are you on 50 or 30 amp supply? Are you wired for a generator?

under load voltage drops to 105 (that's with just the water heater on )
Kerry
09-05-2015, 04:30 PM
under load voltage drops to 105 (that's with just the water heater on )

What were the other voltage measurements? At the pedestal.