View Full Version : Mobile Suites kitchen slideout
jsum24
10-05-2014, 05:26 PM
Has anyone replaced the rollers on kitchen slideout side?
Mine is low under the middle of slideout.
Cannot figure out what is needed to be able to jack up the slideout.
wingnut60
10-05-2014, 09:29 PM
There is an earlier post somewhere on here that addresses replacing the roller, but have forgotten who/when posted it.
Try searching for 'kitchen rollers'
Joe
or try this:
http://www.5thwheelforums.com/forums...pic.php?t=3560
jsum24
10-06-2014, 04:28 PM
Thanks Joe
wingnut60
10-06-2014, 04:57 PM
If you do some work on them, take some pics and post--it will help others when the problem pops up.
And good luck.
Joe
missourijan
10-08-2014, 06:21 PM
We had a roller pop out of the bracket (weird, right?)on the kitchen slide and it was easier than I thought to get it back in. We piled up some 2x8's or 2x6's that were laying around and put our bottle jack on top of the pile (make sure it's stable). We put a long 2x4 under the slide to help spread the load and jacked it up only about 3/4". We were able to pop the roller back into the bracket and it has been fine ever since. You should be able to use this method to add a roller or whatever you need to to.
vBulletin® v3.8.8 Beta 4, Copyright ©2000-2024, vBulletin Solutions, Inc.