raising ride height

rclemons55 · 07-29-2023, 06:20 PM

i have a 2007 36SB3 which rides a little high with my current rig. i cannot lower the hitch or raise the pinbox any further. i noticed another set of holes in the spring mounts which would make it pretty close to level. do you know of anyone who has done this?

Campingnut · 07-30-2023, 08:33 AM

Yes it can be raised, i did it myself with directions/instructions from Moryde

toospicey · 08-08-2023, 08:58 AM

Hi all,
I have a similar issue, only the moride IS has already been raised to the bottom bolt holes. Does anyone know of a 24k pin box with a lower/higher profile than the provided moride? to get the nose down? The pin box is all the way up the only way to get it further up would be to modify the trailer connection box. The hitch can't be lowered (trailer saver TSLB on a 2022 Ram 5500) (2016 Mobile Suites 44 Houston)Any ideas??
Thanks,

Cummins12V98 · 08-09-2023, 10:08 AM

Get the spacers installed between the MORryde IS and frame.

toospicey · 08-09-2023, 11:57 AM

Yeah I was hoping for some magical fix, the spacers are a spendy fix but to get the trailer level it will have to be done.
Thanks!

Cummins12V98 · 08-15-2023, 08:15 PM

Quote:

Originally Posted by toospicey

Yeah I was hoping for some magical fix, the spacers are a spendy fix but to get the trailer level it will have to be done.
Thanks!

Where are you located? Stay away from a RV location.